spud94 Posted March 28, 2014 Share Posted March 28, 2014 I've got a EP82 with TD04 and seems to be running lean what pressure should my FPR be at? It's currently at 2.5 bar thanks Quote Link to post Share on other sites
mikey4410 Posted March 28, 2014 Share Posted March 28, 2014 u need an a/f gauge dude to makesure its fuwling correct.and if you have got one then u need to start of at 3bar fuel pressure and work downwards.td04 @ 1.0bar is usually 2.5-2.7 bartd04 @ 0.8 is around 2.5 although I run 2.2 or a bit less.its hard to say an exact fuel preesure as theres variables like condition of fuel pump,injector cond,rrfpr etc etc Quote Link to post Share on other sites
spud94 Posted March 29, 2014 Author Share Posted March 29, 2014 Thanks for that and I think I need to turn it up as I spoke to a mechanic and he said that the reason my car keeps getting to hot is because it's running to lean, how do I adjust it? Thanks Quote Link to post Share on other sites
mikey4410 Posted March 29, 2014 Share Posted March 29, 2014 mate if ure not sure how to turn up ure fuel pressure then u shouldnt be messing about with it really.get somebody who knows what they are doing to set it up on a dyno etcif its been running lean enough to make ure run hot /over heat chances are some seriius damage has occured to ure poor pistons.what a/fs u getting ? Quote Link to post Share on other sites
spud94 Posted March 29, 2014 Author Share Posted March 29, 2014 I want to get it mapped but need a mappable ecu and I'm not to sure it's at 2.5 bar Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.