Turbo Goose Posted July 17, 2014 Share Posted July 17, 2014 Hi guys, i know eveyone says you can run a td04 without waterlines but do i simply stick a couple of m12x1.25 bolts in there and hey presto or do i wack a little oil in there to keep it lubed then put bolts on. Or does it simply run dry? Smoked a little from the water outlets earlier probably just burning a bit of excess crap outa thereThanks, dan Quote Link to post Share on other sites
Ollieh17 Posted July 17, 2014 Share Posted July 17, 2014 Ive just left mine open Quote Link to post Share on other sites
mikey4410 Posted July 17, 2014 Share Posted July 17, 2014 They stay open with no bolts in at all, and yes running without them is the norm tbh.will be fine Quote Link to post Share on other sites
Turbo Goose Posted July 18, 2014 Author Share Posted July 18, 2014 (edited) Thanks very much Edited July 18, 2014 by Haresign Quote Link to post Share on other sites
Turbo Goose Posted July 18, 2014 Author Share Posted July 18, 2014 (edited) Also, where the water outlets come out from the engine ive just raken one pipe off and looped the other round is that ok?And when removing the water pipes off yhe engine i lost about 1 to 2 litres of water, with this automatically re bleed itself from the rad then just a case of topping it up? Edited July 18, 2014 by Haresign Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.