Gainzy Posted October 2, 2014 Share Posted October 2, 2014 Has anyone had a smokey white problem before remap, I figure I'm running rich due to upgrade turbo with everything else and it only ever occurs sometimes when I'm around 55/60 if I dip the clutch and rev it goes away straight away fitted a new pcv valve new oil/filter everything runs sweet no smoke at a standstill no constant smoke it's getting mapped either way very soon Quote Link to post Share on other sites
Gainzy Posted October 2, 2014 Author Share Posted October 2, 2014 All in all the fuel timing is going to be way out oil temperature is fine soon as the smoke stops it doesn't happen until I drive to 70 then slow or sometimes not even at all pull to junctions no problem, turbo was checked and fully rebuilt was all primed properly new plugs and leads no mayo on cap, I am running fresh blue coolant but compression came back fine, water test fine absolute mystery I'm hoping the map will sort it out Quote Link to post Share on other sites
Adam M Posted October 6, 2014 Share Posted October 6, 2014 I have similair issue mate , random bits of smoke on downrevs or idle. have no idea why or how its getting there Quote Link to post Share on other sites
Gainzy Posted October 6, 2014 Author Share Posted October 6, 2014 I have similair issue mate , random bits of smoke on downrevs or idle. have no idea why or how its getting thereIt can be anything, chasing parts abit, could be 02 sensor, anything all I know is it's a bastard annoyance lol all I know is all these upgraded parts are not suitable for the stock ecu all down to mapping now Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.