Jump to content

Fuel tank/lines set up


Recommended Posts

I'm looking to run an internal fuel tank with swirl pot etc but don't really know as much as I should about it yet.

I did google a few diagrams to see how it should be done but I could only find this one that really only made any sense to me

772DA807-A2DE-4BC1-8AB2-C2C2BDB1FBC1_zps

Now my questions are

1) where do I put the swirl pot? I'm guessing after and before the return to and from the tank?

And

2) will I need to run 2 pumps? Ie: one in the tank?

Cheers in advance

Link to post
Share on other sites

Run the standard tank outlet (from factory intank pump) up to the swirl pot, then run from the bottom of that tank to your new external pump which will feed the fuel rail. The return from the fuel rail will then run into the swirl pot and lastly you'll have another line from the top of the swirl pot back to the tank.


Link to post
Share on other sites

Yeah I have seen it done like that, did a fair bit of looking in to it last night and I think I've got it sorted. I am going to be running an in board ally tank as well.

Just need to double check on what filters and type of line to use now.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...