akyakapotter Posted February 28, 2015 Share Posted February 28, 2015 (edited) Item For Sale:4efte engine (block head ect no anceleies)Item Condition & DescriptionEngine is still currently in the car looking at coming out at the weekend 7/8th4EFTE Engine out of my 98spec glanzaEngine is in good condition only removed due to getting a forged engine.Run at 1bar mapped on Td04 for 3 years with little issues. Head gasket started going few years ago it was very hard for nick at tuning developments to pinpoint where it had started to go. Caught it in the very early stages.See videos for cold start up and up to running temp.http://youtu.be/8gSLHP6YQS8http://youtu.be/av1swUFwW7gcompression test is as follows done with engine up to running temp also pics provided (will be done during the week)Cylinder 1Cylinder 2Cylinder 3Cylinder 4While it was at tuning developments it had the following work done mike commented on how clean the pistons looked said it looked like new good strong engine.Athena 1.2mm head gasketArp head boltsNew Water pumpNew cam beltHead stripped and cleanedTuning Developments uprated valve stem seals fittedHead skimmed @ pressure tested that was all at a price of £750 alone. Have recept I can show you for the work.Engine has a slight weep of oil from the rear could be crank seal would could just be sump sealant will conferm when engine is out if it is crank seal i can include one with the sale for additional price.Price: £595 (prov sold)PicturesPayment & Shipping Details:Paypal +fees bank transfer cash on collection.Would prefer pick up so you can see the engine or can strap it to a pallet if you arrange pick up.Located in Exeter Devon or Barnstaple if allowed to leave where engine comes out. Edited May 5, 2015 by akyakapotter Link to post Share on other sites
mork Posted March 1, 2015 Share Posted March 1, 2015 Hi.. So, what exactly will be on this engine? Is it just the bare block and head? What's the mileage? Cheerd Link to post Share on other sites
akyakapotter Posted March 1, 2015 Author Share Posted March 1, 2015 Hi bud will have every thing but the dizzy top Cambelt cover inlet manifold and maybe a few sensors as I need that for my forged engine. the engine is in a mix of km and miles it's at about 140,000 which is about 105,000miles I will try get the compression test done tomorrow Link to post Share on other sites
mork Posted March 1, 2015 Share Posted March 1, 2015 So will it come with turbo, mani,starter, etc etc.? If so, what's the condition of the turbo? Does the engine have any smoke issues? I only ask because I have a 5e head and I think it's on its last legs. Plus had the filter blow off last year and it dumped all of its oil. Not sure if it's better to just swap it out or rebuild it. Link to post Share on other sites
akyakapotter Posted March 1, 2015 Author Share Posted March 1, 2015 Just an engine fella. Link to post Share on other sites
akyakapotter Posted March 2, 2015 Author Share Posted March 2, 2015 Bump will get better pictures at the weekend once it's out the car. Link to post Share on other sites
akyakapotter Posted March 3, 2015 Author Share Posted March 3, 2015 Up we go Link to post Share on other sites
Johnboy GT Posted March 4, 2015 Share Posted March 4, 2015 Jay Grainger is looking for an engine bud!John Link to post Share on other sites
akyakapotter Posted March 4, 2015 Author Share Posted March 4, 2015 (edited) Jay Grainger is looking for an engine bud!JohnI seen that but I'm not chasing people if they want they will pm me Edited March 4, 2015 by akyakapotter Link to post Share on other sites
Johnboy GT Posted March 4, 2015 Share Posted March 4, 2015 I seen that but I'm not chasing people if they want they will pm me Good point palJohn Link to post Share on other sites
mork Posted March 4, 2015 Share Posted March 4, 2015 (edited) Did you do a compression test mate? Edited March 8, 2015 by mork Link to post Share on other sites
akyakapotter Posted March 12, 2015 Author Share Posted March 12, 2015 (edited) Bump I completely forgot to do a compression test as was to excited to get it out and get the forged lump in. Edited March 12, 2015 by akyakapotter Link to post Share on other sites
toyotag2014 Posted March 12, 2015 Share Posted March 12, 2015 I have seen and heard this run and if you saw and met the owner you will know it's been well looked after and loved I can defo vouch for this bloke Link to post Share on other sites
akyakapotter Posted March 12, 2015 Author Share Posted March 12, 2015 I have seen and heard this run and if you saw and met the owner you will know it's been well looked after and loved I can defo vouch for this blokeThanks dude appreciate it if it dosent sell it can live in my shed till a later date lol Link to post Share on other sites
mork Posted March 12, 2015 Share Posted March 12, 2015 So what mileage has it done in total? And what power were you running? Bummer that you didn't do the compressionttest, was really important. I'm not questioning your honesty or anything, just can't afford to put another smoky engine in my car. Any movement on price? Cheers fella. Link to post Share on other sites
akyakapotter Posted March 12, 2015 Author Share Posted March 12, 2015 Dude I've ready told you all this in last posts lol has 140,000 km on the clock was converted to miles at 89,000km and I've done 50,000 miles so it's at 105,000 In a mix of miles and km 1bar for 3 years mapped by tuning developments 233.4 it's not a stock engine so it's worth more than I've advertised it for so no bud no movement on price sorry cheers nick Link to post Share on other sites
mork Posted March 13, 2015 Share Posted March 13, 2015 (edited) Sorry dude, must be having a blonde moment!! Yeah, I did read the previous posts, don't know why I wrote that again! What a dope! Edited March 13, 2015 by mork Link to post Share on other sites
McGeary1 Posted March 15, 2015 Share Posted March 15, 2015 hi, is this still for sale? Link to post Share on other sites
akyakapotter Posted March 15, 2015 Author Share Posted March 15, 2015 Yes pall it's sat in my shed. Link to post Share on other sites
McGeary1 Posted March 15, 2015 Share Posted March 15, 2015 Brilliant bud. I've pm'd you as well. Link to post Share on other sites
akyakapotter Posted March 15, 2015 Author Share Posted March 15, 2015 Just replied to you fella Link to post Share on other sites
jnwhyte14 Posted March 28, 2015 Share Posted March 28, 2015 the engine still available? everything there like bottom end? Link to post Share on other sites
akyakapotter Posted March 28, 2015 Author Share Posted March 28, 2015 Engine is prov sold waiting on payment bud sorry Link to post Share on other sites
beef sr Posted March 31, 2015 Share Posted March 31, 2015 Let me know if the sale falls through bud be interested in the engine.cheers Link to post Share on other sites
akyakapotter Posted May 5, 2015 Author Share Posted May 5, 2015 sold please lock Link to post Share on other sites
Recommended Posts