petehezy1987 Posted March 6, 2015 Share Posted March 6, 2015 hi just struggling to get my cat off my 1999 starlet 1 bolt i just cant get to!!!! does anyone have any tips? or no how to get the bastard thing off!! lol would be amazeing. Quote Link to post Share on other sites
_shaun_ Posted March 6, 2015 Share Posted March 6, 2015 try the basics WD40 and a breaker bar if that fails add some heat. if you dont have a blow torch or anything can always let it run for awhile to heat up just becarefull you dont burn urself as everything will be hot then. Quote Link to post Share on other sites
petehezy1987 Posted March 6, 2015 Author Share Posted March 6, 2015 i got most of the bolts loose there is 1 bolt that is reaaly is a tight spot, just cant get to it. well can get to it just havent got the room to move the spanner Quote Link to post Share on other sites
JDMfreak Posted March 6, 2015 Share Posted March 6, 2015 what car sorry to sound silly glanza v or glanza s if its glanza v think there is a 4 or 5 12mm nuts on turbo side and 3 14mm where joins to midsection usually its the one at the back near block that is the bost awkward only way is to remove efi pipe and use extensions to get it off i had similar hardship getting it off Quote Link to post Share on other sites
petehezy1987 Posted March 7, 2015 Author Share Posted March 7, 2015 its the glanza v mate. and ye you have got it spot on! its so awkward. was it easy getting the efi pipe off dude? i cant belive i spent like 2 hours just trying to get this bloody bolt off!! lol thanks fella Quote Link to post Share on other sites
JDMfreak Posted March 7, 2015 Share Posted March 7, 2015 efi pipe comes off handy enough two bolts and clip on turbo intake only way i was able to take it off was with a 3/8" drive 12mm socket and a couple of extensions and a bit of fiddling and it will come off dont worry if the stud comes out along with nut some do this Quote Link to post Share on other sites
petehezy1987 Posted March 7, 2015 Author Share Posted March 7, 2015 are i see i was afraid the stud might of come out.cheers dude am going to give it another go tomorow, soo fingures crossed!! lol Quote Link to post Share on other sites
JDMfreak Posted March 7, 2015 Share Posted March 7, 2015 if it does it does no problem try get as much of the bits outta your way make it a bit handier and give ya a bit more room to get at it im nearly 100% there 12mm nuts on the cat to turbo Quote Link to post Share on other sites
petehezy1987 Posted March 7, 2015 Author Share Posted March 7, 2015 ye nice 1 mate. They are 12mm your right so awkward lol Quote Link to post Share on other sites
asbo-v Posted March 11, 2015 Share Posted March 11, 2015 Dog leg 12 mm spanner ?if not just take it of from manifold and cat pipe and do it of the car and same when putting back on if this helps Quote Link to post Share on other sites
petehezy1987 Posted March 12, 2015 Author Share Posted March 12, 2015 sorted now mate it was a right fiddle but got in done now cheers for your help lad Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.