Gumball89 Posted April 8, 2015 Posted April 8, 2015 Right my drivers side rear wheel bearing has welded itself to my stub axle due to failing what are my options I've tried hitting it with a hammer ect ect part of the bearing has broken off but its defenetly 100% welded on so my question is is there anyway to get the stub axle off i cant see so new axle what my best option? Quote
enots Posted April 8, 2015 Posted April 8, 2015 Tried heating it with a blowtorch?i had one collapse on me before and the centre of the bearing was well and truly stuck had to heat it until it finally popped off Quote
Gumball89 Posted April 8, 2015 Author Posted April 8, 2015 Yea tried heating it ect think im just gunna change the axle as a finale resort Quote
WallaceGlanza Posted April 9, 2015 Posted April 9, 2015 A set of pullers and heating and cooling should get it off, changing the whole axle because of that is pretty drastic! Quote
Gumball89 Posted April 9, 2015 Author Posted April 9, 2015 I've tried heating it and i borrowed a puller from work. Its welded on there good Quote
WallaceGlanza Posted April 9, 2015 Posted April 9, 2015 Angle grinder a slit in then chisel the fucker off! Quote
Gumball89 Posted April 13, 2015 Author Posted April 13, 2015 This was what i tried at the weekend managed to get a bit about 5 mm off but the rest is well and truely welded on i have ordered a new axle now so im not too worried Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.