Dan507 Posted April 18, 2015 Share Posted April 18, 2015 first test drive in the glanza today, first thing that i noticed it that it isn't revving freely. struggles though the whole rev range on and off boost, currenty running .5 bar and have the FPR set to 45 PSI I've checked for boost leaks so it isn't seem to be that but i will 100 percent confirm this with a boost leak test. Turbo is a speedvision ct9 hybrid. any thoughts guys? Quote Link to post Share on other sites
satyrs Posted April 19, 2015 Share Posted April 19, 2015 Check sprak plugs and duel filter. Those two items are easy neglected from maintenance.Can you post a video of the problemen so we can hear and see whats it like.Cheers, wouter Quote Link to post Share on other sites
Dan507 Posted April 19, 2015 Author Share Posted April 19, 2015 will do mate, plugs seem to be ok, i've put the old fuel pressure regulator on and it pulls fine now, main issue now is the fact that white smoke is prouing out of it i think it's turbo related Quote Link to post Share on other sites
decdd19 Posted April 19, 2015 Share Posted April 19, 2015 white smoke is usually caused by water i think not turbo Quote Link to post Share on other sites
satyrs Posted April 19, 2015 Share Posted April 19, 2015 white smoke is usually caused by water i think not turbo or overfueling. could be miss installing the fpr. not ment to dissrespect but check the fpr is still good. or maybe mistake made with the fuel lines. good luck and let us know. cheers, wouter Quote Link to post Share on other sites
Dan507 Posted April 21, 2015 Author Share Posted April 21, 2015 turns out it was the ignition timing, going to set it up properly over the next few days. Quote Link to post Share on other sites
Dan507 Posted April 21, 2015 Author Share Posted April 21, 2015 or overfueling. could be miss installing the fpr. not ment to dissrespect but check the fpr is still good. or maybe mistake made with the fuel lines. good luck and let us know. cheers, wouter it was installed correctly, just not set up properly. opps haha Quote Link to post Share on other sites
satyrs Posted April 21, 2015 Share Posted April 21, 2015 great that you found the problem. !! Quote Link to post Share on other sites
5e colin Posted April 21, 2015 Share Posted April 21, 2015 u running 45 psi :) u only need 34psi for 0.8 bar boost !!!!!! Quote Link to post Share on other sites
Dan507 Posted April 21, 2015 Author Share Posted April 21, 2015 i went from this guide mate http://www.toyotagtturbo.com/forums/showwiki.php?title=How+to+Install+a+Fuel+Pressure+Regulator Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.