KPJUK Posted June 16, 2015 Share Posted June 16, 2015 Hi everyone, I'm not really in the know with these but I need an ECU to run my 1999 4E-FE from a Corolla. It's the 3rd generation engine and won't run for more than a second thanks to the ECU cutting the engine due to an immobiliser issue. Does anyone have a JDM ECU that will work with this engine that doesn't have an immobiliser. Preferably plug and play but can repin if necessary. KP Link to post Share on other sites
daniel_g Posted June 16, 2015 Share Posted June 16, 2015 You'll need an ECU that uses the DIS Ignition system from the Gen3 FE, theres a dude on here selling an EP95 ECU in the forsale section.I think it might work but i duno if the later starlets like the one its out of had an immobiliser, it was from a 99 starlet. Link to post Share on other sites
KPJUK Posted June 16, 2015 Author Share Posted June 16, 2015 Thanks for the reply I managed to get it going - key was too close to the antenna and now she starts. Unfortunately there is a huge sump leak and the belt covers need replacing. KP Link to post Share on other sites
Recommended Posts