Vturbo Posted August 3, 2015 Share Posted August 3, 2015 I'm looking to run 1.5/6 bar on a td04l, I just need advice on injectors, size etc. also does anyone have any links that aren't too pricey? Quote Link to post Share on other sites
Vturbo Posted August 3, 2015 Author Share Posted August 3, 2015 http://m.ebay.co.uk/itm/550cc-injectors-DENSO-195500-1370-high-impedance-/161763540999?nav=SEARCH Are these a direct fit/suitable? Quote Link to post Share on other sites
HOK Posted August 3, 2015 Share Posted August 3, 2015 You need high impedance mate.try and get the newer style denso injectors though as they give a better spray pattern, smaller drops too. Quote Link to post Share on other sites
HOK Posted August 3, 2015 Share Posted August 3, 2015 https://www.injectorrx.com/denso-fuel-injectors/Only link you'll ever need dude. Should be pinned on here.few injectors not on list but it covers most.You need high impedance ones so not the ones with low OHM. :-) Quote Link to post Share on other sites
Stu Posted August 5, 2015 Share Posted August 5, 2015 You can use low impedance injectors but you will need to wire in ballast resistors on a heat sink. Usually a 25w or 50w 4R7 per injection channel will do the job. Quote Link to post Share on other sites
AdamB Posted August 5, 2015 Share Posted August 5, 2015 You would be doing very well to make anymore power at 1.6 bar Vs 1.4 bar mate. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.