Johnny Posted February 15, 2016 Share Posted February 15, 2016 After an Oil cooler kit. Ideally looking at a filter remote kit, with some fittings, sandwich plate (Thermostat) and a cooler. Whats everyone got lying about before I source some new bits. Cheers Link to post Share on other sites
Johnny Posted February 16, 2016 Author Share Posted February 16, 2016 Bump,anyone? Link to post Share on other sites
Johnny Posted February 18, 2016 Author Share Posted February 18, 2016 Bump, anyone? After a decent 10AN oil cooler Link to post Share on other sites
jamesglanza Posted February 19, 2016 Share Posted February 19, 2016 Think most oil cooler Kits are an12 mate, Wardy has a nice mishimoto set up with stat. Link to post Share on other sites
jeffrosie Posted February 20, 2016 Share Posted February 20, 2016 http://www.ebay.co.uk/itm/231559686133?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AITThermostatic sandwich plate with AN10 unions http://www.ebay.co.uk/itm/252250301114?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AITAN10 10 row Oil Cooler http://www.ebay.co.uk/itm/AN-10-AN10-Straight-Red-Blue-Hose-Fitting-For-Fuel-Hose-And-Alloy-Fuel-Tank-/360594290989?hash=item53f518392d:g:TAoAAOSw8cNUPU11AN10 hose ends http://www.ebay.co.uk/itm/AN4-4-AN6-6-AN8-8-AN10-10-Braided-Fuel-Oil-Hose-Off-Cuts-CHOOSE-YOUR-SIZE-/331601731017?var=&hash=item4d3500ddc9:m:mhwmMh-D0dd7CfLX4pIydgwAN10 Hose AN10 Relocation kithttp://www.ebay.co.uk/itm/UK-2PCS-3-4X16-20X1-5-Oil-Filter-Relocation-Male-Sandwich-Fitting-Adapter-Kit-/231851295391?hash=item35fb6a029f:g:OIYAAOSwT~9Wl1AU Hope this helps.AN10 is sufficient as the bigger engines use this to good effect Link to post Share on other sites
Johnny Posted February 21, 2016 Author Share Posted February 21, 2016 (edited) Cheers for heads up, bought a few bits now but still after some Mishimoto or mocal branded parts. Mainly the Sandwich plate and/or the oil cooler. Just because I like the names And yeh Jeffrosie, I bought a full Black/Red kit for £70. Cooler is actually decent, just gotta wait and test the thermostat when it arrives. Prefer a mishimoto if anyone has one?????Think most oil cooler Kits are an12 mate, Wardy has a nice mishimoto set up with stat. Most are 10AN mate, same as Racing Spec covers Edited February 21, 2016 by Johnny Link to post Share on other sites
jeffrosie Posted February 21, 2016 Share Posted February 21, 2016 Also piston engined light aircraft use AN10 oil lines to oil cooler. Its not the pipe size but the size of the oil cooler. Link to post Share on other sites
jeffrosie Posted February 21, 2016 Share Posted February 21, 2016 Only thermostatic oil plates are Mocal that I have seen. Link to post Share on other sites
Johnny Posted March 3, 2016 Author Share Posted March 3, 2016 Bump, anyone got anything still??? Link to post Share on other sites
Recommended Posts