Jump to content

Glanza1996

Member
  • Content Count

    349
  • Joined

  • Last visited

Everything posted by Glanza1996

  1. Just a quick one is this the correct coolant for a glanza and how much do I need to do a complete change. Halfords OAT Ready Mixed Antifreeze 5 Litres Thanks https://www.halfords.com/webapp/wcs/stores/servlet/ProductMobileDisplay?catalogId=10151&langId=-1&categoryId=255224&productId=160508&storeId=10001
  2. Okay thanks before I go ahead and buy some of that stuff does anyone know if this stuff would be any good for the suspension as I have a bottle of it in the garage it's called vactan. https://www.ebay.co.uk/itm/VACTAN-RUST-CONVERTER-AND-PRIMER-1L-RUST-TREATMENT-5-50-shipping-option-/122473698488
  3. Does anyone know if Hammerite Waxoyl Aerosol stuff would be okay to spray on my BC coilovers as they have slight corrosion and I want to remove it. https://www.halfords.com/motoring/paints-body-repair/specialist-decorative-paints/hammerite-waxoyl-rustproofing-for-cars-aerosol-400ml-clear Or is there anything else I can use instead?
  4. Just a quick one what is the hub nut torque setting for a front wheel bearing on a glanza. Cheers
  5. I will get all that check thanks gorganl Idrees are your front wheel bearings specifically for a Toyota Glanza or are they just standard starlet wheel bearings? I have ordered a new wheel bearing for the Glanza and I have received the bearing and I have done a quick google of the part number LBK8362 and on one website it does not list Glanza and only says its for a standard starlet is this the reason I could be having issues or are the LPB wheel bearings fine? do all suppliers send Starlet wheel bearings as they are the correct front wheel bearings? Cheers everyone for th
  6. That`s cool I will have a look at getting the tracking & alignment done after fitting a new bearing, Are the bearings from ID-Workz any good?
  7. Were does everyone buy there front wheel bearings from for a Glanza? The reason I ask is because I have had to replace both my front wheel bearings x2 times now within a year and it is really annoying me. I have just recently had both front hub flanges replaced and wheel bearings but the wheel bearing has gone again so this is going to be the third time I have got to replace the front bearing but this time it has only been 5months. Does anyone know why my front wheel bearings keep failing on me I have just been buying them on ebay.
  8. I am using a hks actuator and what is wire on the TPS how do I check this?
  9. Hi My glanza is holding back on full boost I thought it was fuel cut so I turned the boost down to 0.6 but it is still holding back and feels really sluggish it just feels like it's got no oomph and I have noticed the boost does creep up to 0.7 then back down to 0.6 anyone got any ideas? Cheers
  10. As the title says I'm after a good condition Drivers side rear caliper for glanza
  11. Also my cobra alarm has not been working properly latley for some reason if I press the button to unlock the doors or disable the alarm it dont always work now for some reason you have to keep pressing it loads of times but this did not work earlier.
  12. Cobra alarm was going off I try pressing the button on my key to stop it but did not work I opened the door and it stopped but I tried to start the car and it did not start the battery is brand new but I have not driven it for 2weeks now would a brand new battery die that quick without driving it or has my cobra alarm drainned the battery dead or is my alternator broke and need a new one of them or is it just my cobra alarm that has had it? I have now disconnect the batter to stop the alarm going off.
  13. Oh really awesome, I dont support you know the code number or if I ring them will they be able to find it out.
  14. Hi has anyone got the crank pulley wheel nut or know were I can buy 1 online as I have lost mine. Cheers
  15. Yeah the roads are siick the drive from mine to cheddar is all windy country roads aswell love it.
  16. Hi bud did you fix the problem if not check the bulbs are not blown then I would get onto checking fuses aint blown etc I live in Southampton as well could always meet and ill take a look.
  17. So just an updated in case anyone else ever gets this problem, I took all the bulbs out etc as you know but I left the fog lights button pushed in and that was what kept blowing the fuse so I am waiting for the wires to dry then I will try again. But I have now noticed that 1 of my back brake lights dont come on when the lights are on but they both work when the lights are off so im going to try chaning the bulb fingers crossed.
  18. I have now taken out the dashboard, side bulbs, numberplater bulbs, front fog bulbs and the fuse is still blowing as soon as i switch the lights on
  19. I have changed the fuse and the lights still dont work the old fuse was blown so I had a look at my rear bulbs and they are all blown so i have replaced the fuse again and put new bulbs in but it has just blown the new fuse straight away any ideas what wrong??
  20. Just had a look and yeah my tail lights and fogs light aint working cheers mate I will get new fuse tomz
  21. I went through a puddle last night and now my speedo lights are not working but the boost gauge lights, handbrake light, seatbelt light, engine light are still working were is the fuse located on a ep91 glanza or also would it be the fuse or could it be somthing else? I am just guessing fuse. Cheers
×
×
  • Create New...