Jump to content

burt

Member
  • Posts

    94
  • Joined

  • Last visited

Everything posted by burt

  1. Not really, still no power at the plug
  2. Thanks for that might be a big help. I didn't find any power in the plug
  3. still can't find anything Loose. Tried a different heater control that doesn't work. Does anybody know if the plug that goes into the heater has a live and which wire because I couldn't find a live with ignition on
  4. Heater fan didn't work on the way to work yesterday, but briefly did on way downhill on way home! I've got lots of the dash pulled apart now. Checked the visible connections. Can't find any loose.
  5. No its only started happening in the past few days since I been back at work. No chance to do more than check fuses (easy bits) Everything else works in car works
  6. Fully cutting out on any speed
  7. I've had a search but can't find this problem Heater control panel works on every position, heats well and every speed works. Problem is it cuts out when I accelerate! I've checked all the fuses and can't find anything wrong with them. I'm thinking it's a loose wire but has anybody got any other ideas of what it could be, or where/what I can check Cars a 97 n/a Thanks Burt
  8. Found the bulbs in my eBay list. I ordered t3 and they fit
  9. Think it's t3. 8mm base
  10. Not a T5/286, They are like a thinner smaller 501/t10 T5 are used in fag lighter, 2 in heater and depending on the dials used dials there's some there and some I have a pack of led lights to use in switches but there's no part number
  11. http://www.pit-bitz.com/product_info.php/spice-toyota-starlett-ep91-p-793
  12. Hope it helps.
  13. Mine all came out of the sr I scrapped
  14. Installing sr doors onto a na (the way I did it) both models were 1997 Unbolt wings from the car Unbolt doors Drill hole in A pillar for cable to pass through There is a recessed section on the pillar so very obvious (should really paint the edge) Line up new door and bolt on Push loom plug through the new hole and plug into the matching plug in car behind the kick panel Bolt wings back on MAKING THE CENTRAL LOCKING WORK. Remove trim panel/speaker from under steering wheel Locate this plug/fuse the white one on the right Add this relay to it Check central locking works MAKING THE WINDOWS WORK. With the dials out find this orange plug Fit this module Install here, if you have taken the module from a sr it will probably have the bracket attached Check windows work before putting dials back in. The whole job was straight forward and was finished in a day. If you are switching doors like I did, don't forget to change the locks over from the old doors or you will have 2 keys. I also put a remote central locking kit at the same time Burt
  15. I made a guide my na has sr doors on.I'll try to find it
  16. That's really good of you. Would love the skirts, and the draws on my birthday ;)
  17. What's the difference between the glanza shelf and na? I have have 1 with toyota speakers and 1 uncut both from na
  18. Thanks Aamir pmd back
  19. If you could ask for me that would be great. I'm going to Poland and Germany in march so I could pick some up
  20. Thanks
  21. Do you have any idea where the eyebrows came from? Would really like some for my na
  22. I had the fly eye stuff on before and most people said it would be better without. But have thought about getting some more. I've got a spare pair of lights so I can give it a try. Looks good on the micra. Thinking about putting some glanza skirts and 98spec lights
  23. Cheers. Anyone know where I can get eyebrows for a na?
  24. Fitted my new wheels today. I got impatient and couldn't wait for my new centre caps
  25. Take it back and get the balance checked.possible the weight weren't attached properly.also check the tyres aren't out of shape
×
×
  • Create New...