vit

have you got fuel pressure regulator stock/ aftermarket check the vaccum pipe that goes to the inlet for leaks or lose connection..as if there is crack or leaks on that pipe it will get high idling as well ..

as you can c im needing help yet again, ;) always needing help lol. anyway like every other glanza my front badge has faded/flaked off so im just wondering if anyone knows how i get this off the car? do i have to take the full bumper off!!!?? i tried to pop it off but decided to stop as i didnt want to break it.if any 1 has any hints please feel free to through them my way ;)

thanks gemz x

hi mate,if you take out your grill the black part which is cliped to the bumper ,you will get to screw behind the badge take it off the badgge is out ..and if you don't need the badge let me know as i'm after one any condition ....hope that help.

x

thanks for the nice pics Jag was nice to meet you all.

Was nice to meet you all yesterday,big thanks to everyone..

some pics

hi,so what the plan for today then ,meeting at normal place then move to bluewater..no problem will be there..

hi ,had the same promblem when got the no plate surround on my car ,had the wiring made up. can get one .

hey ,should be very proud of yourself for that wicked transformation in that time and trust me that will not stop.. what next on the list..

think all the corolla manifold seem to be missing from syard

just some update on my car,its got a new remote air intake,electric window,uksc sticker and new sump and may be will get a new front lip in coming days...

air intake

think will join you all there will be my 1st medstone..

1) JAG - V (N)

2) Chanelle1234 - SR

3) Bildo + StarletRick - V (N)

4) VPower - V

5) Joe - V (N)

6) Alex- prick (N)

7) Al- S14a (N) + Ash (N) + Sophie (N)

8)vit-ep91 replica

nice look ,are you using coilovers or is it on lowering spring ...

that's a good purchase

hey ,if you know what you are doing and can find the thermotat switch ,remove the plug and brigde the two terminal ,if it work your wirring is find and it will be the thermostat switch,but if does not will be some wiring problem,check allthe connection might be lose connection. hope that help .

thermostat switch for fan and the thermostat is two diferrent thing.

will be able to used a regular hose with same diameter...think is same size as screen wiper wash hose ... goes in the fuel regular the small thing at the end of fuel rail... here a picture hope that helps..

same for me no problem reported you will be fine..

nice purchase mate ,having seen where the sr started and what was the result " the yellow beast " i know there should be some big plan around anyway good luck ..will keep an eye...

So they'll be ok then, if i can maybe just adjust the rear arch. going strip it when i get chance too so that will help because won't be havin anyone in back. How are yours with no1 in the back?

Nice 1 enzo, could you explain waht a panhard rod is?

Thanks for the welcome guys.

normally i don't have anyone at the back .but all depends on what offset your wheels are..

Right, my rear exhaust mount, the one that holds the backbox up has started sagging like a grandma. Can anyone link me to any polyurethane (powerflex or similar) exhaust mounts taht will fit a Starlet? I'm finding it impossible to find any.

Cheers guys.

hi mate,

have replace mine with powerflex which have got from halfords like 2 year ago,was a long rectangle one with many hole just have cut it down to fit starlet. or if you need a standard starlet one think have one in my garage.

welcome to uksc,

i'm running on 16'' as well got 40 rear/40 front but rear arch are rolled in and its fine..before they were just catching the arches offset are et35 running on 205/45/16 a bit bit too big will go for 195/45/16 next time.

lovely looking clean rep bud. i couldn't tell it was a rep till i saw the inlet mani

so will need to remove that pics then .thanks

very very nice mate like the gold wheels

thanks but like your white wheels

will try to get some better lense soon, not very happy with the rear look ..may be will lower a bit more and change that 4.5'' exhaust ..

for the sticker it 's a japperformance parts sticker on the r bumper , Chanelle if you want one will be able to get you one. no prob.

thanks everyone for watching and all your coments.

All will be clear soon man, thanks for your contribution

As for what photos were after, just anything that relates to that. We could even settle with a picture of an ignition barrel the ignition thing

Cheers

ok ,will be able to help as got lots of them or can get them for you.hope that help.

To the top with this one, c'mon guys, help us out

hello Galliano,what photo exactly you are after,what you are going to used that for ..like for ignition will this one do ,were you after these type of photo..