starletezy

Standard cams are as good as

Water temperature sensor ^

As you have taken the icv off your ecu will be confused will definitely need to get it mapped to correct it think an emu will do it at an minimum standalone would be best obviously. One way to test it when the problem happens disconnect the plug from the tps see if it makes a difference.

Oem is always best to use

Had almost the same issue throwing up all sorts of weird codes bogging down cutting out running lumpy misfiring ect.. after striping an replacing every single sensor fuelling system and ignition system with no luck I checked my ecu and it was shagged causing all the issues so have a look at your ecu and also that the wiring hasn't been disturbed. Also it can be an fuelling or ignition problem and something that needs replacing along the line

Could be your tps or icv have you had the car maped with the icv delete?

£110ono need this gone!

Best bet compression test then an sniffer test

Yes it would

Its true mate I did the same lol but lesson learnt

There just a pain in the arse to seal

Another problem with an Athena gasket what is going on lol

Looks proper lush that!

^ As above that's something to consider as well. Won't need mapimg no

Sounds like symptoms of a bad fuel pump

keep us posted mate

It could be a number of things mate It could be your ignition system or down to a vacuum leak or bad fuelling. What is the exact symptoms does it hesitate to start at all? does it cut off on its own?

Might need a good service by the sounds of it

^

have you ran the car properly yet? might just need running

Have you seen the prices they sell there cars for? of course there going to make a profit. If they were selling this car they would be asking for double

Exactly the thing im going to do to the new gasket im putting in now worth a go

It does defiantly cost that including shipping and import duties mate i would know as i have an imported gt with similar miles as i said its very fairly priced in the condition and miles its got on it

1.2 will be fine the standard gasket thickness is 0.5mm. head bolts i don't really don't know they will definitely hold 250hp plus

To be honest the price is fair if you was to import one in this condition with low mileage you will be looking at 5k plus. Good luck with the sale mate!