Sportif 4efte

Did this sell?

Thanks mate

I’ve got 6 wires going to the n/a distributor 4pin plug and 2 pin plug on the glanza ecu I’ve only got a 4 pin plug. So far I’ve chopped the old 2 plugs off and put the glanza distributor plug on(without it being connected to the circuit) not too sure which wire to connect to which pin n what happens with the remaining 2 wires from n/a loom N/a 4 pin connector blue green yellow white/black N/a 2pin connector black/white/black Glanza 4pin connector blue green white red. That was the other question he asked me to ask for...

I’ve chopped of the ecu plugs (engine&dash) of the n/a loom and chopped of the 3 glanza ecu plugs of the glanza engine harness and glanza dash loom now I’m using the 3 glanza ecu plugs and connecting the pins to the n/a engine and dash loom (matching the pins) I’ve managed to match up everything apart from 2 pins which are 1 and 15 from the n/a engine loom n not to sure to which glanza pin they go to. N/a engine loom Pin 1 rotary solenoid close-cold idle speed control N/a engine loom pin 15 heated oxygen sensor.

Mate yes I'm splicing fte bits into the na loom..

A friend of mine is the middle of a 4efe to 4efe-t...the problem he has atm is... If any one can help... Glanza ecu connector 1 pin 10 and 11 what do they connect to.. N/a starlet 16 pin connector pin 1 and 15. Anyways around these.. Thanks guys.