joe-ep91

yeea my bro sold it on shorter afterwards to a woman, bit crazy, was gonna try and take him to court as the car was "unsafe and dangerous" supposedly..

Unsafe and dangerous. and that's what they're like straight outa the factory! lol

Great series. That dickhead on the roof who thought he was IT ended up getting cuffed to the pipes was LOL!

Really, where does the other £350 come from?

ay £450 before shipping?

your be looking at about £700-£800 delivered to your door

no way is a plug and playh worth that amount of money

i shall definately keep a close eye. cheers for the heads up.

Sweet, i might seriously consider this. Have looked into the shipping fees and hopefully shouldn't be too much, we shall see.

Hi, how much is the going rate for an Access ECU from Blitz. Just in talks with some blokey from Japan and he's after £450 before shipping. Is this an ok price? What do you guys think, thanks.

Joe

cheers lads, been really starting to piss me off. it can be a nightmare in slow traffic.

Joe.

I've recently been getting a noise that sounds like ABS (low grunt-ish sound) and my brake pedal loses all effectiveness as if im skidding, it only ever happens when i'm doing a slow manouvre (parking, 3 point turn, reversing etc) but i'm not. It's almost like the abs kicks in but i don't need it to, if thats makes sense. I was wondering if anyone had experienced the same or knows the source of the problem. Could it be a sensor for the abs or something, i dont know. Thanks in advance,

Joe-EP91

That's strange because it sounds real and looks real, and came with all original greddy/trust box and manuals. Thanks for the feedback tho i'll look into it. Are there any other ways I can check it to see if its a copy?

Hi, I'm thinking of selling my Greddy Type-S dump valve. It's in very good condition, but I've got a perfectly good dump valve and tbh I need all the money i can get at the moment due to recently becoming a dad! Just thought I'd put a topic up to gather peoples thoughts on how much roughly it should go for. I'll put on some pics tomorrow. It's a genuine Greddy/Trust unit with the Greddy/Trust decal on top which shows how to adjust it. It comes with a universal flange on it, so i bought a silicone hose reducer because the flange that came with it was MASSIVE!

Thanks,

Joe-EP91

Definately coming now as the little nipper hasn't popped out just yet! ;)

mirror?

Cant wait for this, haven't been to a meet in about 6 months! Cant promise anything tho as my mrs is heavily pregnant and our baby's due to arrive on the 20th! Hope she can hold on til then lol

Joe

1) JAG - V (N)

2) Scott - GT (N)

3) KY - V (N)

4) Ben - V (N)

5) Bartrumboi V (N)

6) chanelle - SR (N)

7) Curt - (N)

alex-gt(n)

9) tattoo - V

10) Starletsportif - Sportif

11) Joe-ep91 - V (N)

Hey man, havent heard from u in a while. That thing must be rapid now!!! Pretty sure the clutch will go soon tho or have you already got an uprated clutch?

Joe

yep thats it mate, you can actually take it to about 0.8bar which is just under fuel cut, but it depends whether you are suffering from slight boost creep which might exceed 0.8bar in higher revs on full throttle

Joe

if so you need to:

1) unclip the actuator from the wastegate undoing the cir-clip

2) find the nut on the actuator arm and loosen

3) Wind the actuator arm inwards turning it clockwise, only a few turns

4) tighten up the nut and re-connect to wastegate connector

hope this helps

Joe

take the arm off the actuator and turn the nut down 2 or 3 turns re-connect then take it for a spin. then keep repating until you get a safe bosst under fuel cut (0.75 bar)

lol, beat me to it

Have you got an adjustable actuator then?

Yeah thats what got me confused. Didn't know whether it was an old toyota or an old mazda at first

Sorry, To save you watching through 6 mins of other cars its the last race at about the 5 minute mark i think.

Was pretty drunk last night and came across this mad starlet in a random 6 minute drag clip

Atleast I think its a starlet

Joe.

Good stuff man, what you up to today? Might pop over.

Joe

ohh my god!!! They look shweeeeet Aaron, nice one mate

I use castrol 10w40 semi-syn

Nice glanza Kyran, looks fresh. Is it lowered at all??

Joe

I can vouch for this car being minto fresh. Good to see the thread up and running max.

Joe