string
-
Content Count
965 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by string
-
i made a new bracket on mine. like two u shaped flat bit of metal and they were clamped with the nuts on the cable. before i made them though i just used the rolla mount n used the nuts on the cable. from memory. sorry if its wrong.
-
yeah i understand that. So shall drill a new hole n bolt it that way. Obv theres 3 flat ish holes for seat frame. 4th goes into tunnel. My side mounts use existin feet of old frame. So that hole is used by seat frame. Can i use same bolt for harness then seat frame or is there another way? Cheers craig
-
yeah transmission tunnel side i'm stuck with. Is yours in same hole as frame mount? One bolt for both? Or could i use the rear side mounts on seat itself? Cheers craig
-
and everyone else has done it this way? i'm unsure. cheers anyway mate
-
side mounted seats. how have u done the left bolt? 4 points is two in back. right side to bottom of old belt mount. left side bolts where?
-
i understand liam. i know youdid alot for a few of them. maybe a once a month meet? set place n time. on a sunday before mfn maybe? i dunno. everyone thats intersetsed should say where there frm n how far they'd travel maybe. go frm there. show everyone the midlands is the shizzle haha j23 m1 half hour to hour. further if its big
-
unless its a big big meet like mm in june/july with mag coverage etc peeps don't wanna travel 2 hours in the hope everyone on the list turns up. mfn midland meets were big. pics frm ages go looked like a fair few. is notts more central for most. i'm j23 based. cheers
-
safe liam. Car needed a clean. Front mount fittin n wheels paintin. Not sure either black or grey? All the other starlets were lookin good. Do u go down mega early to park in top car park? Think i seen ya with the gf n a lad. Strolled past me on the grass where path is. I was deep in convo wit the new owner of tsl. Safe
-
in theory your not out of pocket. Still gotta buy an engine. Still gotta forge. Just put it down to experience. Obv hassle of swappin engines but oh well. I had same situation after takin car to garage n something up. Not engine but new crack in bumper. Can't prove anythin but pisses me off. Just my two pence worth.
-
liam. White gt next to his. Ian bentleys mate i think. Also silver glanza with white wheels next to proton. Another silver glanza wit wide fenders. Plus did i spot brewins sr in top corner near liams? Safe. Was in gt wit green wheels.
-
i know someone whos got a rolla mani. Was mine. Then i sold to a friend who polished it up. Could get a price if ya like? Safe
-
Vag Vs Jdm Meet - 4th April @ Mfn, With Streetrace & Ignition
string replied to Liam_D's topic in Midlands Region
convoy? Say a time n a place because i dunno wheres best. Or i.ll sort something with mike g unit. -
At 190 200bhp In A Glanza What The Typical....
string replied to silverglanza's topic in Performance & Track Days
letstorquebhp.com. calculator on there for stuff like this. also loads of cars already calculated. -
is it still 200 brake? or is his new turbo pushin alot more? cheers craig
-
so they do fit. Cheers
-
you mean the locater pins? Or actually chopped the rail? What u done with your old seats n rails?
-
rails fit in a 95 gt? Then i can take whole seat out, butcher the 91 rail to fit bucket. Cheers craig
-
i didn't mean using a c pillar bar. I meant the mount you'd use. Where the rear seat belt goes through at top near boot hinge. Is better there or off rear bench mount.
-
does anyone run there harness of the rear mount. Presume c pillar mount. Seen it on a ed cars n wondered if his was better than the rear clicker point. Cheers craig
-
so how many people on here have attached the harness on a roll cage? compared to the bolt where the rear clicker is? was goin to install a harness off that bolt but not sure now. cheers craig
-
have bought one of those 5" jobbys and was wondering where to take rev signam frm. read some poeple use pin 7 of ecu or straight off clocks. on an ep82. where is ecu as can't find mine behind glve box or behind centre console. cheers craig
-
are u lettin it warm up? does it stil ldo it after ten mins of driving. my old ct9 if u went on boost frm cold wud make a funny whistle cranky noise.
-
i beleive on all turbo cars it would do it. not just on tong turbo. if your actuator isn't holding wastegate closed properly it would vibrate off boost right? nothing but big ups for tongs. made me 162 at .6
-
i had same problem. tighten actuator up n its fine. its because theres a small amount of play in the wastegate arm n penny(the round washer ting) attatched to the end. need the wastegate arm under pressure. i'm running .5 on actuator n then manual bc. hope this helps craig
-
Guessin it was me. Keep seein a bluey purple civic about with blue sidelights? U still got ya sr or has everythin gone? Craig