GT Phayer

I know the twin pots go on the starlets but do the 4 pot celica calipers?

I have a fuel regulator and hi flow fuel rail. Are them injectors the same fitment or do you need to cut and solder in new plugs

Thanks guys this is how she is at the moment nearly ready for the body shop

Thanks guys

Cheers mate

So after photobucket going tits up i have chose to redo my build thread... This is how the car looks after i picked it up.. Was a bit tatty but a good base to start. 1st off i removed the power steering Then because its going to be a track car i decided to take the dash out and get rid of everything i wont need Removed all the heating and loom i dont need which took a age! Then i fitted my wheels because the others were damaged Car needs a good scrub. Then it was time to tackle the dreaded sound deadening and treat the rust i found Then i had the headache of getting rid of every wire i dont need Next job was to do the door card and get rid of all the wires and window regulators Next i fitted the grill and new lip Then i got the new inlet bolted on Then i fitted some angle iron to mount the radiator further forward to make room for the turbo and new intercooler pipe route Next prepping the rocker cover for welding Then i cut my bonnet to fit the catches Then i fitted the rear bar Next i had a go at making perspex windows which still need finishing The i gave the dash bar a lick of paint to brighten things up and you can see how much of the loom has gone Then i fitted my turbo kit which im so happy with Next is to give everything a good clean and get everything ready for paint this is how its sitting at the moment Just need to finish the headlight cold air feed More pictures to follow comments welcome.

What injectors will i need to run big power on a 5efte ? running over 400

What injectors will i need to run big power on a 5efte ? running over 400

I have just gone to update my build thread and all my pictures have gone and i have a message from photobucket about sharing with a 3rd party and i have to pay 399.00! if i was my images to be shown?

My daily corsa

used a bit of stainless steel angle iron was £16 for a meter

i just cut the outer skin off removed no bars

Finally got the wiring loom all trimmed just need to neaten things up And because i need to move the rad to make room for the new turbo and intercooler route i have to use some angle iron to make a new mount for the rad All fitting neatly more to come

What bars do you mean mate ?

Took a lot of cutting haha just waiting to bond it on and fill the gaps

Honda civic mate

Might be able to do it at the weekend mate

Yes i have the standard grill mate just without the gt badge

I have a smoke tester at work mate finds any air leak

needs a smoke test mate

cant atspeed do it Jay ? And yes i will be getting plastic windows soon

Done some more on the gt today After trimming the loom i got the new connectors to neaten things up and covered the wires up Also got this finally Got this bolted on to. Also got my front lip on just waiting to fibre glass the joins and fill the gaps ready for paint. Screws are just holding it in shape for the moment untill its set. More to update soon thanks.

i know it took hours to get off haha

cheers more to update soon

Hey does anyone know places in Essex that do weld in cages for ep82s and also a rough price ?