starbogt

I only use 1 small then 1 large then other side 1 large and 2 small as with the 3 as specified it was too tight going to alter them when I get more time

What amount of washers are you using on it? Side to side action is OK on mine but still stiff into gears with them! It must be to do with the bearing being straight!

Anyone that has used the bearings on selectors can you tell me how many large and small washers you have used either side of the bearing?

Checked them all this morning and all feels free so I greased it all even the gearbox side, felt fine so I think it may be the bearings not sitting straight on the selectors... I tried the gear change without being clipped on and it was OK so I'm guessing its related to cable to gearbox connection. Going to change gearbox oil to eliminate that side. But any more ideas wouldn't go amiss :-)

Hi guys need a little technical help. I have a stiff gear change but only in gears 1 2 5 I've recently replace knackered gear linkage bushes with bearings and turned the chocolate block. It was stiff before but not this stiff. Any ideas other than lots of grease? The cables seemed loose enough the mechanism in car was free!

Awesome build can I ask how did the management affect where or how your boost came in? Keep up the good work

I would put a rrfpr on and increase fuel pressure as the ecu will be not reading injector cycle correct and see if it improves. The larger injectors won't be at efficient spray at standard fuel pressure. Like socks says the ecu will be set for standard injectors :-) good luck.

Flash all you like hun at at least I know who it is now!

Bit Gutted I can't go but I'm going to JAE and might try for Japfest 2 as its closer

I saw another Silver/Blue N reg Glanza down the same road a few times is that anyone on here? I thought I was driving into a mirror lol

Yeah its me Zoe I used to see you in yours a lot but flashing a starlet in a BMW looks weird lol Not seen yours in a while is it away for the cold weather ?

Fireworks would be the last thing a dog would be scared of after seeing some of you lot last year lol we had 2 dogs on camp tbh and they were fine.

1) Rob + Amy
2) ro55ifumi
3) Hair
4) Tara
5) james@cjperformance
6) Steve GT
7) Starbuck
8. TrisK + DanGEP91
9) Akyakapotter + Tara

10) Jakeep82
11) Sefton-EP91 + girlfriend
12) Drongo boi + 2
13) Drongo's dad + 1
14) PaulStarletSR
15) DaveEP
16) Lottie +1
17) Rob H & Kat
18) LukeSR +1
19) Bluebear
20) Weyro
21) Socks
22) Taggy
23) Josh@stick-2-it
24) Azz ( first time)
25) Matt1878 + Samantha
26) Liam_D + Sam
27) Mark
28) JTStarlet92
29) Shorty + deebo
30) Ollie + J (shorty n grants mates in the mx5)
31] EP91Ben
32] nick260890
33) ,Malcolm GT 
34) Towbar (JAE VIRGIN)
35) aaddzz123 +1
36) Jack-ctr
37)Starbo-Moorley
38) Turbo Grant
39)*starlet_babe
40) Lew777
41) *Zoe*
42)Michael!

43)philGT93

44)chrisgreen1993

45) SiCaln (MX5)

46) Pobbette +1

47) theminiguru

48) JIMJAM

49) Tom

50) Woody

51) Ryan Lang

52) Starbogt + 1

So what does it exactly do because its doesn't seem to do anything on mine lol

Wires do go up behind the clocks somewhere so you could be right as I have indiglo dials I'll have aplay in the dark later lol. Just hope its not wired into the boost controller lmao cheers guys

I recently bought back into the starlet scene and it has this button which looks like a water spray button anyone know what it is?

I'll be there for certain :-) back into a starlet so can't miss it. Anyone going to take a decent logburner this year lol

Do you have the drivers door hinges? How much if you have?

SOLD starlet here I come! anyone wanna sell me a TD04 or big turbo starlet?

Do the rear seats still fit in this with the cage?

This has full main dealer history up to 160k

Reduced £2300

Where is this located?

Any offers I really want a starlet again lol.

Price altered sorry typo!

no problem