Broony

I've already explained all this to you ?? Peter North drowning you?

OK mate. Thanks for the reply. Just seems a bit odd that it only slips on 3k but I suppose that's when the turbo must kick in properly.

Sound like it tbh buddy. Does the engine noticeably rev higher i.e sound and not just a bad gauge?

If i were a betting man id put it on the clutch.

sounds like clutch slipping. the more load you put on it that will reach a point where its can't handle it and it slips hence on boost. more boost = more load

When the clutch slips that disengages the engine to a degree and allows the crank to spin faster hence the revs increasing.

Haha, was nice to see Genuine parts

Absolutely freezing though!!

I see you Mr Moss

Sorry bud missed this!

It was more future proofing, but one of the main reasons was that I used a ptfe braided line so I can run ethanol/methanol in the future. Standard starlet lines won't like that, and the shear extra volume you need of meth / eth over standard road fuel is massive so a large diameter line also helps with that. I could end up running 1000+cc injectors in a meth setup.

Ahhh sick, the dedication to design is really good man!

loving this thread like Rob!! happy with the fuel setup? what advantages have you gained over stock/in tank setup? would love something like this.

Love Sparco N1's were they originally red/polished lip?

Peter

they shouldnt be too much if i remember correctly

id price new syncros if i were you and change them while you have them out. they might look ok but could be worn. changed my 5th gear and the syncro looked fine, swapped it out and what a difference

They look very similar to the sparco n1 wheels, could be black racing copies (Japans Rotas)

Rule number one 1# Make your car fit your wheels.

You wont go far wrong in life

Good choice on wheels

its a little wrong but i think id quite like lambo door and neons haha bring back the 90's

^^^^^ now thats spoken like a adult ha ha supra will make your family starve

You obviously dont know MR Gaines well haha anything but adult

Think I'll look into billet wheel turbo just see how it goes slow process.

haha should of just bought one done rather than fucking around

Karenasx, lad in Ireland had on for sale think he's called rock kick ass on here.

JayJ just for your info pal not shitting on ya thread : http://www.rhdjapan.com/orc-309-single-plate-metal-clutch-kit-toyota.html

My wheels? Nah i love them

Got my project MU nuts from RHDjapan

http://www.project-mu.com.au/en/products/other_nut_lock.php

Yeah they are a good wheel some snazzy wheel nuts and they will look ace!! i have some project MU nuts to go on:)

Nice choice!! ;) I still have my boxes too

Its all about making for car fit your wheels

i have the +35

They don't fit over bigger brakes, i had to space mine out 25mm neending wider wings

get the slut finished!!

Shame its a photoshop be cool as fuck