Jump to content

Dean @RW-Developments

Member
 View Profile  See their activity

  • Content Count

    2966

  • Joined

  • Last visited

 Content Type 

Everything posted by Dean @RW-Developments

  1. Dean @RW-Developments
    some great tunes there im mainly into my speedgarage, funkyhouse, bassline, and frequency
  2. Dean @RW-Developments
    thanks fellas i got a hks ssqv to go on the slightly older version so will be reli high pitched and hopefully some chatter when i up the boost! thats after its run in of course
  3. Dean @RW-Developments
    looking good man keep up the good work
  4. Dean @RW-Developments
    dont get me wrong i absolutaly love chatter so i hope when i turn the boost up i should dump with an everlasting chatter at the end i wish anyway
  5. Dean @RW-Developments
    cheers for all de good coments, @ cal its really easy to make the c pillar bar but its hard to get a bar with the ends already flattend as you will need to flatten the ends. yes the bar is pretty strong it galvanised steel! @ markoos i carnt wait for the engine too. ive been waiting since day 1 and more i really crnt wait for the tssshhhhh
  6. Dean @RW-Developments
    looking good mate carnt wait to see this in a few weeks
  7. Dean @RW-Developments
    i recon it should actually be held in the midlands and not somewhere miles away, cannock wouldnt be that bad as theres pleanty of big carparks, it would be good if we had the meet on the 26th which is a saturday because my engine should be in just intime plus bourkey and markoos are cuming down so we could have a mint meet with pleanty of cars! 26th FTW just find a good location!
  8. Dean @RW-Developments
    good to hear more peope choosing starlets for there first car
  9. Dean @RW-Developments
    the only difference about the glanza cal was on about is its still on standard internals and rr at 243 bhp at 1.2 bar, the car is goes well lol!
  10. Dean @RW-Developments
    im sorry cal but 3 hours wouldnt get it like the polished ones ive done atall! and you never use a wire brush on aliminium as it leaves deep scratches, if any one is interested in me polishing theres then i could polish it at a cost as many hours has to be spent sanding and polishing by hand it would also be polished on a proper bench polisher(not some contraption on the end of a drill lol
  11. Dean @RW-Developments
    looking good guys looks like you had the same wether as me lol
  12. Dean @RW-Developments
    no probs i will probaly send it to you towards the end of the week as it needs a bit more work lol but ill let you know whats going on!
  13. Dean @RW-Developments
    looking good bourkey
  14. Dean @RW-Developments
    ok mark the progress pics on your rocker cover youve been waiting for! when it arrived needed some sanding and more preping lol lots more sanding now for a quick polish it still needs a fair bit more rubbing down this is how it stands though! hope you like
  15. Dean @RW-Developments
    cheers for doing that for me! thanks for all the good coments DIY FTW
  16. Dean @RW-Developments
    cars looking good mate
  17. Dean @RW-Developments
    it wont be 4efe power for much longer lol as for the bonnet it will all be sorted pretty soon got used to it though
  18. Dean @RW-Developments
    that persons bin watchin too much fast and furious lol
  19. Dean @RW-Developments
    wats up with your bonnet then? theres a place in tamworth called graphic wizard there quite good the number is..... 01827 312 333 ive sin them sticker the whole side of vans before so giv them a try. personally id just respray it will look better!
  20. Dean @RW-Developments
    welcome mate cars looking good!
  21. Dean @RW-Developments
    to be honest ye its only really for show as long as the pole is quite strong i dont see any probs, i just carnt justify spending like £110 on something that is really for show! if you haveany problems just pm me! its really easy
  22. Dean @RW-Developments
    ive found an oil sandwich plate with the thread sizes for a toyota and als it says is its a 3/4 for toyotas nissans and fords? can any one plz help and confirm cheers Dean
  23. Dean @RW-Developments
    id like to know this to please as ive just brought an oil pressure gauge. i know the senders thread size is 1/8 male. if someone could tell me the thread size for the oil filter?
  24. Dean @RW-Developments
    looking good mate, you can get a nice anodised purple one of them ducts, wat ever colour you get will look good!
  25. Dean @RW-Developments
    nice pics mate, jw have you scuffed the carbon splitter? it might just be the light.
×
×
  • Create New...