Jump to content

Ryan-11

Member
 View Profile  See their activity

  • Content Count

    1447

  • Joined

  • Last visited

 Content Type 

Everything posted by Ryan-11

  1. Ryan-11
    if your gonna touch up the stone chips dont use a brush, roll a bit of paper up to a point and dip the point in the paint and use that to touch up the chips. best way to get rid of them is to sand them out or use a bit of filler to fill the chips and paint the panel again.
  2. Ryan-11

    Poor Car

    Ryan-11 replied to a topic in Off Topic

    you have to respect the work gone into it, alot of hours
  3. Ryan-11
    im a panel beater
  4. Ryan-11
    I never thought of that Rory, Ill get it turned 90 degrees before i get it back on the road
  5. Ryan-11
    i fitted mine above the intercooler beside the air filter
  6. Ryan-11
    This is one of my favourite gt's just wait till u get it boosting at 1.4 bar it will fly
  7. Ryan-11
    Die Antwoord - enter the ninja caspa - back for the first time Tiny tempah - writting in the stars nas & damian marley - my generation Loick Essien - love drunk HWood - could it be you magnetic man ft Katy b - perfect stranger
  8. Ryan-11
    heres mine, but only if your cars fast enough its not on the window tho
  9. Ryan-11
    that is looking awesome top work, keep it up
  10. Ryan-11
    Green wheels and cage FTW!!!!!! Do it! it will be awesome
  11. Ryan-11
    looks sweet, love red glanzas whats the spec?
  12. Ryan-11
    Nice one! Good luck with mapping
  13. Ryan-11
    Should be fine, just make sure theres no leaks, ive done it loads of times, just make sure theres no rips or splits.
  14. Ryan-11
    Nice one could u not just take the seals off your old injectors?
  15. Ryan-11
    yeah u should be able to get them from a motor factors, just have to hope they have them in stock
  16. Ryan-11
    Yeah they will be the same as a uk starlet, theres 3 seals on each injector, one o ring and 2 bigger seals, two seals at the top and one at the bottom.
  17. Ryan-11
    A new door hinge i would think.
  18. Ryan-11
    Going by what people are saying on tgtt it looks like the valve guide was put in worng causing the valve to flex everytime it opened and eventually snaped over time, ill be getting onto the company that rebuilt the head and see what they say. The way i see it is its there fault.
  19. Ryan-11
    if i do go for a rebuild, it wont be this engine, its already been rebored and forged and the bores are scored quite badly, id prob go 5e but need to have a think about it, ive spent so much money on this car and it keeps braking, i just dont know if its worth it any more?
  20. Ryan-11
    Right, i got the head off tonight, looks like the valve has snaped, its fucked the head, piston and the bore, so looks like ill be needing a new engine or stripping the thing.
  21. Ryan-11
    yeah u will need a forged engine for 300 bhp, i dout a td04 would hit 300 but it is a great turbo, not too laggy and plenty of poke at 1.4 bar, if u go for td04 and get bored u could get a td05, that would hit 300 no bother i would think. its a bit laggy but not too bad
  22. Ryan-11
    Right i took the inlet manifold off the other night and found something that wasnt ment to be there lol... found the valve head witch was crushed, also found bits of what looks like the valve seat, so looks like my head is fucked
  23. Ryan-11
    cheers sparky, i had the air intake painted black before it was white but didnt look too good, PM sent
  24. Ryan-11

    Karate Kid

    Ryan-11 replied to Ryan-11's topic in Off Topic

    Ill give Sam a slap next time i see her ;) its an awesome film.I wana see toy story though ;)
  25. Ryan-11

    Karate Kid

    Ryan-11 replied to Ryan-11's topic in Off Topic

    need to dig out the old ones and watch them again
×
×
  • Create New...