Pierros

Welcome to the forum! Its always nice to have new people as we don't get them all the time! Nice Paseo by the way

Shame to let the Paseo go, but the MK1 MR2 is a nice lowbadget platform for a great fun to drive project. Get a 4AGZE in and swap the charger with a Garrett 2560R and you'll be laughing!

Sorry dude but I can't remember the proper grade. Here are some pics ....

Excellent choice! With the proper adaptors you won't have any problem. Just make sure to use the proper grade of aluminium in order to be lightweight and durable without corrosion problems... They are your car BRAKES after all

Yeap the adapters were custom made. I may be selling the whole kit in the near future if you are interested ;) . I had some pics of the brackets but I can't find them together with the other pics that I have. If I find them I'll upload them

I'm not 100% sure but if I remember correct the disc are from a Fiat Coupe 20v Turbo (305x28, 4x100pcd)

Keep the good work mate!

Yeap had many sales and purchaces with him and he is 100% good

So true so true

Yeap its from Greece and its def a conversion (like all of them).

Yeap its my daily driver as well so I didn't want it to be off the road for too much long. I'm still in the run-in process of the 5E-FHE (I made a complete overhaul before I install it), but I don't find a reason to take to to the 1/4, as the car is more concentrated on handling and attacking corners rather than running on the strip. Although when I make the final fine adjustments in the ecu I'll take to a dyno road to see the results

I haven't installed the turbo yet mate, I'm running in the engine right now and will have it as an n/a for a little while, until I get the money for a custom exhaust, d/p and i/c piping (thats the only things left). I won't be hard thought just a simple swap, as I have prepared everything exactly for this sole purpose.

Didn't got the question mate....

Thats good news, keep us up to date with your progress (the non-Acis 5efhe is probably from a Sera or a 2nd Gen Cynos). Running the stock ACIS loom and ECU will make things far more easier (and cheaper as you will not need an rpm controller to run the ACIS when you'll install it). Also keep the 5e-fhe exh. manifold and modified it to fit (don't swap it with 5e-fe of 4e-fe, its far better, except if you go for an aftermarket).

Go for it. You will be (possitively) surprised with the result

Keep up the good work mate! Maybe you would like to have a look here http://www.jdmbits.com/2010/12/starlet-car...sideskirts.html

Well I've made a 5E-FHE swap to my Paseo and I used a Glanza V loom and PnP stand alone ECU (EP91 Apexi PFC) which is far more complicated, so probably it won't be that hard to swap from a 4E. Have a look here at my thread. http://www.ukstarletclub.com/forums/index....showtopic=14643

I think that only 1 of the 4 mounts need some fabrication and they are good to fit ΒTW you've got a pm mate

The fake GReddy are easy to tell. Get some pics up and we can tell you asap.

Start reading the manga then because the battles continue beyond the ones in the anime (its still ongoing in japan)

Wangan Midnight is a classic (I've been a big fun for years now). If you liked the movie YOU MUST see the anime, as it takes it much futher with epic battles with many other cars (Supra, Evo, RX7 etc). Its a same that they haven't fully translated the manga thought....

Thanks for comments and I hope it goes even better from now on cause I still haven't installed the good parts! The c/f effect dial and the rest of the interior parts are made by me . The spark-plug cables are your old ones thought

Τhanks for the kind words guys. It really took me forever to get to this stage and I haven't even started yet. I'm really anxious to see how the new engine will perform with the n/a setup and see the ACIS in work (the dyno results and experimenting on a Greek forged GT equipped with the ACIS in our last dyno session were apocalyptic to say the least...) .

So finally after A LOT of patience and waiting and a stroke of luck despite my awful financial situation I managed to make the first serious performance upgrade. As you know I've bought more than a year now a 5E-FHE engine from a 1st gen auto Cynos. When I took it apart to inspect it I've seen that it was in quite a good shape. So with everything in bolt and pieces I've had the engine profesionally overhauled with brand new OE parts (full overhaul kit, oli/water pump, piston rings, etc) except from ACL Duroglide bearings and ARP headbolts. Except all the above along with the new engine

Got my copy today and I have one word .... disappointment. Actually make this 2 words, BIG disappointment. It surely the best PS3 has to offer and I didn't play more than a couple of hours with some mates, but really WTF were they thinking at Digital Polyphony? This crap took them 5 years to develop? With those hideous graphics, the half ass option and aftermarket tuning? I was a big fan of the series but I can admit the Forza is far better....