motion

thank you! today i bought new screws from toyota for about 40â?¬ and floated the lower arms with mike sanders grease

today i got my powder coated parts back............i love it!

i hope so!

the oem bracket fits to the whiteline universal bush more pics here: http://www.ukstarletclub.com/forums/index....showtopic=24315

thank you! here are the next pictures:

my little winter projekt: -change bushes -powder swaybar, control arms, rear engine mount and some other parts -rust protection martin

hi, thank you!, but my starlet is already running with plugged glanza s ecu, the wires are already changed and i mounted a 4e-fte knock sensor. one more time......thank you and good luck with your projekt, i am intrested to see your dyno run! p.s: sorry for my bad english @all: many thanks

before: after:

hi, first.....sorry for my bad english yes i want to mount the witeline parts with my stock 20mm swaybar, these are the parts: i measured the oem swaybar, it has a diameter of 20mm so it has to fit to the whiteline bush which has also a 20mm diameter hole. we will see if it fits when i finally got the brackets, my whiteline dealer told me that they must come in about 2-3 weeks. thank you for the help!

i want to powder the lower control arms and the OEM swaybar and change the bushes, i ordered the superflex bushes for the lower control arms and the whiteline bushes and drop links for the OEM swaybar. the german dealer where i ordered the parts got all bushes two weeks ago, but he is still waiting for the bracket , so i was thinking about to take the bushes and try to mount them with the OEM bracket and dont wait longer for the whiteline brackets.

thank you! i will wate for the whiteline bracket.

up!

thank you! @ryan lang: you got PM

will the bush W0400-20 fit with the OEM Sway-Bar bracket? because i am waiting since 4 weeks for the bracket KS6

not the bush, the bracket is 33,5cm long look here: http://i138.photobucket.com/albums/q257/Hi...os/IMGP1514.jpg and some starlets have a 50mm long bracket. you must look what kind of bracket you have! sorry, sometimes it's not easy for me write good enough in english that people understand what i mean

i think you mean 335mm or 50mm you have to look under your car and then you will see how long your bracket is, 335mm or 50mm.

here some pics how i mounted the radiator: http://img194.imageshack.us/img194/4620/p1090045.jpg http://img194.imageshack.us/img194/7344/p1090052.jpg http://img194.imageshack.us/img194/2361/p1090055.jpg http://img188.imageshack.us/img188/4907/p1090061.jpg http://img30.imageshack.us/img30/6622/p1090063z.jpg http://img20.imageshack.us/img20/2320/p1090434o.jpg i took the civic fan, the hoses diameter is the same.

a member of the german toyota board enlarged it.

its the standard throttle body but its enlarged, it has a 50mm diameter. i think its a great work, and i paid about 80â?¬ for it.

thank you! here ist the link: http://www.ms-design.com/home.html but they have no parts for the starlet left, try it here: http://www.envyperformance.com/index.cfm?c...;category_id=96

yes! now i have one, i took one of the 4e-fte because the glanza's' ecu needs the signal. you also need a shielded wire, i took one like this: http://www.notebooksbilliger.de/image.php/...+cinch+kabel+2m and build out of it a knock sensor loom

you need the fuel rail of the glanza's', because of the higher fuel pressure. do you have a knock sensor?

i dont know how it is with the ukdm loom, but the JDM glanza's' ecu wont work plug an play with the german loom. do the ukdm 4e-fe have a knock sensor?

i also have not found any other parts for the rear axle. only some parts from super-pro, powerflex and whiteline for the front.

http://cgi.ebay.co.uk/POLYURETHANE-SUSPENS...34.c0.m14.l1262 if not, where ican get a kit like this for my EP91?