K24_glanza

Done what you said and the pump runs fine then tried to start it with no results. So i took out the spark plugs and turned it over with the pins un bridged and the fuel pump runs for a short period straight after I turn the ignition back to position 2. I am totally confused. Any one got any ideas?

Cheers thanks.

why would you need or own 3 identical cars?

In the process of an ep95 turbo conversion and my fuel pump wont run at all. Checked my wiring and it seems ok. Has anyone had a similar issue or have any ideas? Hopeing for something obvious or going to take the pump out and go through the plug with a multi meter. Cheers peter

It looks really shit. wrapped in just black would look better than fake carbon.

This is a truely amazing project. Thanks for the inspiration.

Need to have a look at a wiring loom and inlet-mani to help me plug my new engine in.

I was just being a retardo. almost all sorted now

I am Half way through an ep95 convertion. fitting the engine loom at the moment a but got a few plugs with no homes to go to. I know iam missing a few sensors but not sure which ones. Can any body take some pictures and label the sensors. I know iam missing the map sensor and I have the part that the dizzy cap plugs into. Also a bit lost with the hoses for the inlet mani the same would be helpful. Cheers peter

I used appoxy. Yee haa! should work. figers crossed

Thats not good. The old bush is in pieces.

I have just cut out the engine mounts from my ep95 only to realise that the lower engine bracket doesnt fit my new power flex bush. The bracket is slightly to big for the poly bush and the metal bush is not long enough. Just wondering if they have sent me the wrong kit or do the 95 and 91 have different lower brackets?

found this maybe some help http://www.ebay.co.uk/itm/Banded-Steels-Ma...9#ht_694wt_1139

Thats quite horrible. Poor guy

Last time I seen a thread as good as this it was your SR build. The car looks amazing. Hope you get it all sorted soon.

Count me in for the RARB

anyone?

I have a full blitz k24 kit and need new seals for the external waste gate any ideas where i can get them?