1990timeismoney

Hi all.

Looking to see if there is any of the above turbos on the forum for sale at the moment.

One that needs a refurb will be ok.

Thanks 

Hi 

Looking to buy a EP82 fuel filler neck,If anyone has one for sale or can point me in the direction of buying new.

Thank you

Luke

Hi,looking at purchasing a livesport spoiler along with mid for my ep82,and come across this company selling re production spoilers.has anyone ever brought threw them or have experience.

Thank you 

Luke 

Hi all looking for the part number or a set of bonnet gas struts.if I remember there was a group buy many years ago looking to see if there's any around to buy or part number and length of strut I will make the brackets if needs be.

Thank you

Luke

Hi all.on the lookout for a passenger window motor for a gt or ep91 if anyone has one in storage.

Thank 

Luke

Hi guys

Having a few running issues with my EP82

Seems to fuel fine when cold. And idle fine. But as soon as it gets warm it bogs down when tried to be driven.also a very flat spot when stepping on gas.

One think I've noticed is that when it's warm if I remove a vacuum line the car goes from running lean to running better afr.

If anyone's had similar troubles like this any help would be greatly appreciated.

Thank you

Luke

Hi All.

Looking to buy a ep82 engine/ecu loom.over time wires have deteriorated and connectors broken so looking for a full replacement if any members have one around.

Thank you

Luke

Made a few test panels out of acrylic with the ability for custom engraving.made from 3mm acrylic and some 1.2mm think carbon fibre panels.

Made a few test panels for ep82 out of 3mm acrylic will be doing custom designs. And one carbon fibre.

Just fitment to trial now.

For sale: under seat storage tray

Item Condition: well used condition.

Price and price conditions:
£80 plus +£8 delivery charge.
Extra Info:
never had the runners for the tray so unfortunately these won't be available its just the tray on its own.
Pictures:

Contact Details pm.

Location:
Isle of wight

Delivery & Conditions of Delivery:
£8 delivery Royal mail

Hi 

Recently changed from wastegate to external wastegate and have a blitz dual sbc is there any one with one installed or have information on where each port goes to.

Thanks

Luke

Hi all 

Looking to buy an 38mm external wastegate with spring to run 1 bar of boost fitted.

Thank you

Luke

Hi all

Looking to buy a complete rear drivers side brake caliper . Good and fully working condition.

Thanks

Luke

hi all.

Looking to buy seat belt for passengers side ep82.

Luke

Ignition light gumtree may still be available.

https://www.gumtree.com/p/car-replacement-parts/toyota-starlet-glanza-v-turbo-ignition-barrel-light-rare-jdm-option-/1370264526

Hi all.

Currently looking for a drivers side headlamp as mine has cracked.anyone with one for sale would be much appreciated.

Luke

Sold

For sale my zisco inlet manifold with the extended 5E throttle cable.

In good condition.

£150+12.50 postage plus PayPal fees

I'll be in to sounds good

Bump 

9 hours ago, H_D said:

bare in mind the baffle plate is steel and the rocker cover is aluminum, as long as the baffle has been drilled out properly any competent welder can blob weld it back in for you, I don't like the idea of using screws/bolts as I worry the may start to loosen off after a while which can cause serious engine failure if they fall out

That's a good point.as above I started to drill and tap for holes to use fasteners like washer spring washer with some high strength stud loctite.i to worry about losing a screw but I hope it holds if not it's of to the welders.and rebuilders.

I appreciate your reply and advice.will update with pics once complete.

3 hours ago, H_D said:

I had my baffle welded back in

That's a good option thank u for the advice.

Ok that's great thank you for the advice I'll get it all cleaned up and look into getting it either bolted or tacked.

Thank you for the reply.ill go with your recommendation and I'll get it drilled and tapped and get some loctite