(NAS) starlet ep82

hi can someone post up a pic showing me the oil pressure switch as my oil light comes on at around 700rpm then with a slight gebtle rev the light wil go off im thinking its the oil pressure switch ? Thanks!

how would i check oil pressure ? when the revs settle down to 700rpm then it only comes on, bt with a slight gentle rev it wil go away the light i mean..

as above my oil light is flicking sometimes when the car idles around 700/50 rpm what could be the cause for this to flick?? oil is fine, no strnge noises etc, only recenty started to flick Thanks!

bump^^ tyres wil be 165 40 16 my other rim is 7j these are 8j ?? wil fit ??

^ bump need to know if these wil fit ?? on ep82 ?

but will defo fit yeah ?? with stretched 195 40 r16 tyres

^ bump

HI guys! im wanting to know if ET10 wheels 8j will fit my ep82 ?? Thanks!

^Thanks iddy wil ask him now

im sure thre on ebay mate!

bump^

as above i have fitted new coilovers in my car.. but didnt get the ''meister R'' stickers where would i get these from ?? Thanks!

Thanks asad'' , i have pushed the camber rite to the fire wall on both sides (as it says on instructions) first time i fitted them i had both front wheels facing outwards lol after some research i sorted the camber out this morning n Thanks cazzac

caz u mean leeds road un ''bradford'' where abouts ?

thanks mate..

would i need to set the camber from top moun ? as camber from front wheels is leaning out on both fronts lol

daz thre brand new coilovers.. i havent messed about with them at all lol do u mean set up tracking ?

Hi.. i've just fitted new coilovers all round in my car now my 2 front wheels face out & steering feels shakey alot.. not really safe to drive TBH its the 1st time ive done coilovers my front wheels are facing out wards, so does that mean tracking will resolve this ???? Thanks!

^ Thanks for the info, n for offering help tho.. ive done research & have adjusted mine about 2cm longer from the standard rod which has made my both rear wheels level to the arch with slight camber & now wheels run inside the arch instaed of under it

finally a proper answer- ive done a quick research, starlet driver side arch has more space than the passenger side.. on a adjustable rod u have to tightn it about a finger space on the rod threads then nip it back up n tightn the 2 17mm bolts that holds the rod, now the rear end is level i wil be doing this over the w/end lol

i got mine used i measured it with the stock rod and was the same length im thinking i shud screw the rod in or loosen it abit so its all level on the back ? lol

lol.. my driver side rear tyre shreads slightly.. also the rod should give the rear wheels a slight camber in, so it dosent catch arches when lowered.. i hope someone else can comfirm how to proply get my rear end level with the rod fitted ??

ive heard its a must on a lowered car.. & it shud level out the rear end

as above i have replaced my standard panhard rod for a ''adjustable panhrad rod'' i have fitted the new one & as always my rear driver side is not level from the other side looking from the arch i fitted the new one brought from a member on here so dint bother to adjust it as it already was.. so i put both rods together n thy was exact same lenght to level my rear end out do i need to take it off again & tighten it in or ?? Thanks!

guys i have sent him a message on f-book the other day still no reply im sure he has a good explanation.. top guy tho!