Jump to content

miib14

Member
  • Content Count

    1988
  • Joined

  • Last visited

Everything posted by miib14

  1. some arty shots of the car and bay taken on my phone
  2. better pics of the flexi it doesnt rest on the subframe, just on there because the manifold was off again... to get welded around all the ports next to the head because it was off i got around 30mins to try to polish it up abit, used 400 wet sand paper and some polish and this is the result, not bad in my opinion now its gone a golden bronze colour
  3. yeah, instant power bump.. yours will have a 4-1 exhaust manifold design, the prefacelift had a 4-2-1 manifold design
  4. yeah it can, remove and put a blanking plate over it, all for emmision purposes tbh
  5. i also just noticed thats its a 98 spec uk, which means that it will have an egr valve on it, which means that its roughly 167bhp stock instead of the prefacelift 177bhp
  6. if you need any inspiration for engine / power mods have a look at my build ;D
  7. got some more pics bought a deck spacer and aluminium radiator today (no pics of the rad, will get some tomorow) fitted much better mid range and top end, hasnt affected low down pull (which was already great) sad thing is that i cant fit my strut brace on there anymore Fitted my aluminium radiator & fitted a 2 point strut bar too as the 3 point one doesnt fit anymore got my ARC Magic Chamber today ARC has developed their very own unique versions of Induction Boxes and Intake Chambers. The ARC Intake Chamber help
  8. got some new wheels OZ Racing 16" x 7" ET37 195/40/16 on front 195/45/16 on rear they do need a refurb though
  9. Fitted the conlight today ! Got the sidelights to work (blue wire), but cant get the headlights to work (green wire) cant find the right wire to join to [flash(425,350)]http://youtube.com/watch?v=Knvf6CgCZsI
  10. Bought this, need to know what wires to wire where? it has 4 wires Red - 12v live Black - Earth Blue - ??? Green - ???
  11. one of my mates got some new wheels, decided to try them on my car... now i want them lol 16" Rota GT3 Also finally fitted my 275mm discs the 255mm discs the 275mm discs 275mm brakes some pics i took whilst the sun was out Ultra Power Leads back on
  12. my last pic was awhile ago, so thuoght id take afew more today Thanks just paid for this little beauty, hopefully have it within a week :twisted: guess what arrived today all plugged in Also got some TRD leads.. some comparison pics of the TRD leads vs the Ultra Power 7mm Leads Ultra Power 7mm Leads TRD lead The Dizzy side (Trd on left, Ultra on right) The spark plug side Ultra Power Leads fitted TRD leads fitted
  13. Got 2 new optional extras My new armrest, needs a clean My C-Pillar Map Lights Dont want to fit these until i have a template of some sort Anyone know what colour wire does what? Some better pics of the arm rest Multibox & cupholders Clean Ace Flare
  14. Cleaned the car and took some pics Need to go lower but not sure if i should because of speedbumps & potholes
  15. I installed the BC coilovers today. I've set the damper knobs to 0 clicks from fully soft on the fronts and 5 clicks from fully soft on the rear. I'm VERY impressed with the ride quality of the BC's. The ride comfort was virtually the same as stock spring/strut combo Going around corners you could definitely notice the difference in the handling performance as it stuck to the road as if it were on rails. So much more responsive.. Im loving them so far :twisted: They dont actually make the car look lower than before. dont know why the damper knob is upside down b
  16. here you are cleaned the filter on my clean ace as a new one is like £34 from toyota :affraid: thanks for the tip shehroze after cleaning fitted my air purifier today and a random shot of my car and my brakes that need to go on really neeed to clean my car now, 2 quick pics i took.. hate the fact i have white wheels and no time because of work...
  17. some pics of the parts i got thanks to a friend :tehe: roof clean ace anyone know what this is? My cleanbox
  18. can either get your own made (probably cheaper) or off ebay, but be warned they aren't cheap lol http://www.ebay.co.uk/itm/ACIS-Toyota-Celica-MR2-3SGE-Rev3-Power-Spacer-Deck-/111189669130?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19e36bb50a http://www.ebay.co.uk/itm/Toyota-MR2-Celica-3SGE-performance-ACIS-Spacer-/281197566448?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4178ae59f0
  19. A picture of the butterflies you can buy a spacer for this, and it does help with getting abit more power, much better mid range and top end pull, doesnt affect low down torque (which is already great)
  20. not vvti, it has ACIS. butterflies in the inlet manifold chamber that open at 5500rpm..
  21. very nice buy indeed, bulletproof engines in them... i should know, i have one in my corolla i have an fgk manifold for sale for the celica if you are interested?
  22. miib14

    New FPR

    maybe still be a bit rich on cold start, which is causing it to flood with fuel and not enough air getting in, try putting the fuel pressure down a little bit more and see if that sorts it. i know that the coolant temp sensor also plays a part of the fuelling side, so may need to change that
×
×
  • Create New...