miib14

Thanks for the comments people My bro always loved his Almera's GTi, had a turbo before. he went out did this crazy build took him about 6 weeks non stop... Car is crazy lol, he is going to rebuild in the winter and put a VVL engine in hoping to get around 190ish bhp (that would be scary) LSD is one of the best mod on the car 4.7FD will make it better! hehe

thanks bro

Almera wing mirrors not perfect but looks miles better than m3 mirrors Alloys Sprayed New front end Rear Sides Apexi gauge Bay Looks much better imo

better than running lean

Might not make sense as its copy and pasted lol Right so after the sad demise of the EG, and selling the subaru.. a mysterious voiced whispered to me to go back to Nissan. Now having already built a Turbo N15 wasn't keen on a) doing another turbo N15 ;) driving a bog standard GTi. Was very close to buying a R34 GTT in white but then settled something a lil less good... Nissan Micra!! After reading about others rust problem with there Micra's, was determined to find a MINT shell which I knew would be hard considering these cars are the best part of 15years old.. But they say good things come to those who wait... If this goes well I'm hoping to do it for couple of other people as well. Before The car is an ABSOLUTE mint shell.. its got a few, I mean a few dings and bumps nothing major! Theres one teeeeny weeeeny bit of rust, infact it aint even rust just starting to bubble, size of a sweetcorn. First thing was to get rid of all the crap sticker stuck anywhere and everywhere to hide the defects! And get rid of the rubbish interior! the seats felt you where leaning against a rock and don't even get me started on the steering wheel This is where it begins boyss First thing first; De stickered - Engine y0 Started collecting parts Donor car yessssss!!! - Almera GTi New seats - Recaro GTiR fuel pump (it will fit had it on my turbo) Brake lines Got few whiteline bits Brand new: Rear ARB Panhard rod: New clutch and lightened flywheel LSD FTW!!! (very rare to get for a almera gti) Jerrick @ MeisterR is doing me a massive favour so should have Zeta-R Coilovers from him in next 6-8 weeks cant wait. Price he gave me is unbeatable even almera's are more expensive lol So all parts are here just need to get the shafts made, tomorrow engine should be out so off we go... Engine out of the micra Engine out of the Almera GTi Well firstly got the mounts lined up then welded them after a mock fit The underbrace needed a little shaving Engine in perfect I thing :tt2: Engine out and welded properly ( need to neat it up a little) Sprayed the rear satin black Custom shafts :smile: ( painted to see if any hair line cracks so far so good) Interior sprayed black Treated the damn rust :no: ( will weld a patch on tomorrow) Recaro Seats fitted Raditor on with two slime line fans Nismo Strut brace on Booked in Unique exhaust on thursday cause no exhaust atm... getting 2.5 mandrel bent system with either a SPOON N1 backbox or a Skyline R34 backbox Well thankfully everything is done... Had to get the passenger side shaft shortened cause of the lsd Had to make custom ARB brackets so it doesn't touch the shifter Rear panhard and arb fitted Also got the water pipe on the head custom made so I could mount the rad pipes properly. Half under sealed Had a go in it no problems at all :biggrin: Will sort and tidy up all tomorrow hopefully Car is now completed, running sweet Long day today but well worth it Went today morning and finally got the exhaust done with SPOON backbox it sounds awesome Few pics of Phil doing his magic he even fitted my lambda sensor in a new position On the way back whilst weighing the cat in I weighed my micra 820kg with a sr20!!!! Then headed off to a dyno to see what it's pushing Got a nice surprise with just a stainless Mani/exhaust and blitz induction kit I got 142bhp 127 lbft Finally coilovers are here the one and only MEISTER coilovers for micra Special thanks to Jerrick for sorting it out Fitted JWT S3R cams Which resulted in this lovely idle Fitted the meisters coiles they are awesome :grinning: Fitted new some T1r's at the front for more grip... just needs tracking and camber sorted before i pay vist to santapod this weekend Polished and glowed Went to pod yesterday Best time was 14.51 could do a lot better though Micra (14.97) Vs Scooby Micra Micra doing 14.51 (missing 4th :frown:) his 1st go as well My best video Mov micra SR20 VS Dale Autech (217bhp) Epic race [media]http://www.youtube.com/watch?v=BSsRXUYeXbo Micra FTW low 14's is easy achievable with a little practice not bad from a 142bhp micra ha

dont think it works like that...

also can be done my messing with timing... can be done by using launch controllers too iirc

future plans

Welcome back luke

neither did i

post them up, il have a go when im home

thanks mate, i saw yours just before leaving... you were in the line.. yours looked awesome id say 150bhp ish

thanks for the tip mate, will do that next time im there thanks

video of my run but not the quickest run, really bad reaction time on this run too.... my quickest was 16.3

First time i have been to the strip definetly going to go again Name : Ishaq Model : 1993 Corolla Turbo Substantial Mods : FMIC, 2-1/2 exhaust, Decat, Jam FCD, RRFPR, 0.8bar HKS actuator, 6 speed gearbox, exedy clutch Full weight or stripped : 1150kgs + 1/2 tank fuel (not by the end lol) Tires : Falken Ziex ZE 912 BHP : estitmate 150bhp Quarter Mile : 16.3 Terminal Speed : 84.90 mph

heres the results, bear in mind this was my first time on a drag strip 17.3485 16.9423 16.5507 16.6408 16.3147 (84.90 mph)

today

never been to drag races so first time... had it checked by afew people including chris and its fine... just me being paranoid , this is the last bit fun in a turbo before it comes out and then in goes the 2l thanks hopefully it will be goooood...

thanks bro, so should be somewhere between 14.5 - 16.5 roughly... no pressure then

running 0.8bar boost, hks actuator, FMIC, JAM FCD, RRFPR, 2.5" exhaust system but its in a 4 dr corolla that weighs 1150kgs

hi guys, im going santa pod tomorow and wanted to what times i need to be getting to match a starlet... so whats average for a turbo? Ishaq

hi guys, is anyone going to be going santa pod tomorow? me and my cousins are leaving at 7am to be there, anyone want to join us? also just out of interest, what times do most starlets run roughly? Ishaq