Rob Scott

yeah nowt to worry about

picked up the coilovers tonight, cheers Dan B

cheers dude,

gonna pick up a set of coilovers for it tonight.

some more pics...

I've seen a white starlet parked up in bamber bridge, and also an orange one drives past my house in Preston. anyone on here?

Did some more work on it today, finished off the backbround vinyls, fitted cam belt, shimmed up the valves,

just got to change the oil and set the timing and fingers crossed it should be OK and not smokey :S

The car was gonna get raced this year in the BTRDA rallycross champoinship, but last week i got an email, its been cancelled for this year.... ghay.

so looks like I'll be doing some hillclimbs in it for this year...

looks like all my previous pics have gone, whats happened to the forum since i've been gone? seems its all gone to cock?

Yeah sorry, a lot happened last year, got a new job, and got married too.

Been working on it today, made the polycarbonate windows, and wrapped the roof in carbon fibre too.

I'll get some more pics up tomorrow.

http://www.bargainspares.com/toyota-quad-itb-conversion-for-5efe-4efe-cynos-starlet-tercel-paseo-sera-corolla-from-cbr-throttle-bodies/

/>http://board.tercelonline.com/viewthread.php?tid=24777

theres someone on the net who put bike TB's on an e-fe motor, i'll find the link for ya

accidently found it when i was looking for somthing else, lol

/>http://gafu.orconhosting.net.nz/Site/Med/15L_4_CY.pdf

ha ha random.

that would be great fella, smintyfesh@hotmail.com is my email addy cheers

N/A manifold for the time being matey,

allreety, whats the factory clearance between cam and bucket on a 5e cam

cheers

whats the actual difference between the engines? head or block height?

yep just checked, 4 teeth longer, 5e has 128 teeth and 4e 124

balls, back to autofactors before it shuts.....

allreety, are 4E and 5E cam belts the same?

cheers

Rob

got the head back, and just put it back on the engine.

put each piston to TDC and rotated the cam shafts to check for any interferance, and there isnt any, even with 1mm shaved off there! so good news is, even if the cam belt snaps, the engine shuld be ok.

picked up a new continental cam belt and alt belt for 28 squids from my local auto factors, so once the rain stops, i'll get it all back together,

anyone know of any tubular exhaust manifolds for sale?

cheeeers

no mate i wont be sorry.

hmm, think i'm gonna stick my boat on ebay to pay for some decent suspension.

so anyone want a picton GTS 150 14ft speedboat with a johnson electric start 20hp outboard? lol

also seeing as the car has to run in super-mod, i'm gonna either turbo the 5E or put together a 7a-ge 16v turbo but not injection

cheers dude

well, if anyone has got a set, that i can borrow for a month, i'll pay postage for them.

Allreety, has anyone got a full toyota optional lip kit for the paseo that i can borrow to take moulds from? so i can make them from fibreglass.

i'll be able to produce them pretty cheap for members on here.

cheers

Rob

cheers for the offer dude, allready got a full gasket kit.

just stripping the head off at the moment, to change the valve stem seals. been to toyota today to get the bi-hex tool for the head, but they didnt have one.......... and i saw the new 86 in there yesh yesh just arrived this morning. i asked if i could have it to race, and they sponsor me, they say noooooo, but may sponsor th other 86 and paseo.

and bad news, the paseo doesnt qualify for stock hatch, its toooooo light. so will go in Supermodified :S so while ive got the head off, its getting skimmed 1mm to up the compression, port and polish the head, and match the manifolds for now.

theres no carbon on the pistons, and the bores are mint, so its got potential for a bit of tuning.

just got a set of 14 inch A032 yokahamas in soft compound all my other tyres are forest/gravel

also, anyone got a standard gear knob?