QUADLIGHT GT

by the way guys ''Rash'' is my cousin (asian lad in the pic) & is a genuine guy has been in the trade for well over 15+ years! he's not the sort of person to steal other peoples cars i know tht for sure! i've actually seen this car in the flesh & was spotless! i just hope it returns to the owner asap in the same nick! i'l keep an eye out around the west yorkshire area where it was bought from as there are a few gti's around my area! ;)

^ any idea what price toyota charge for these ? fronts n rears i'm after! Thanks!

i use semi synthetic.. , fully synthetic will be the evan better stuff as for underseal i personally thing the spray on makes a mess as it sprays all over.. so i normally paint it on with a soft paint brush! jus mke sure the underbody is fully dry n clean before u start painting.. not a hard task really! i did mine on ''axle stands'' took me a full week on a proper professional job.. the finish is very neat!

Hi guys! as above how to remove brake shield/cover whch is behing the brake discs ? Thanks!

10w-40 millers oil is wht i use it's really good tbh! as for underseal give the underbody a really good clean with a soft brush & degreaser using a towel thts wht i do with all my cars lol underseal with added waxoil is probs the best stuff around.. ive been using it for over 5 years now.. it never cracks at all

most people normally use semi synthetic 10w-40 oil ive undersealed mine last week actually.. i degreased n wire brushed where there was any rust.. & painted on 2 coats of underseal-waxoil usually one coat is enough tho

Hi guys! want to know how to roll my rear arches wihout damage to paint work on my ep82 ive heard it can be done DIY with a rubber mallet but how good is the finishing look tho ??? have already removed my arch strip jus need to know how to roll them DIY Thanks!

cheers guys! not a big job as i thort then.. will nip to my mates garage tmorrow Thanks again

as above i'm wanting to know how to remove alternator pulley???? - so i can fit my new anodised one on there.. theres a bolt on the pulley but just spins the whole pulley it self which is confusing :S hopefully u guys who have brought these anodised pulleys from the group buy wud be able to help me Thanks!

as above ive ordered a set of superflex bushes for my car - over a week ago now & still have not recieved them yet :S anyone had any experiences with them before or know there delivery time ? Thanks!

i see this car everyday.. this car is local to me, well i know the guy a little.. tbh its not as mint as it looks..

oh.. think i'l leave the rear crush tube on there n only remove the half moon washer then get the wishbones powder-coated ? Thanks for the advice bro.. appreciated

<br /><br /><br /> Ok sounds straight foward then.. BUt i wont be usung a "lift kit" Basically i'm upgrading to poly bushes only Thanks bro

thnks for your comments my bad.. i'm actually referring to the both wishbone bushes actually.. ive had the both bushes removed from a garage bushes removed- now i jus need to know if i pop the front bush ring out to remove the (thin rubber with ring around it) will i need to reuse this again after i have the wishbones powder-coated ?? or can i buy some new ones from ?? Thanks!

as above i've removed standard front wishbone bushes.. as i'm fitting poly-bushes question is how do i remove inner front metal tube as that also has a small lip rubber on it too ??? , as i will be having these wishbones powder-coated which will go in a very hot oven to bake so dont want to ruin anything.. i'm sure some people on here hav had thres powdercoated wht did u do ? Thanks!

just ordered them Thanks again bro..

<br /><br /><br /> Yeh thanks asad" ive found the bushes on here.. Confused what sizes i need for the ep82 front wishbones ?? :s

Ive ordered antiroll bar bushes frm larkspeed, BUT looking on thre site i cant find wishbone bushes? Where can i buy reasonable priced ones from ?

<br /><br /><br /> ^ think i'm gna do the same as u did by drilling holes shud be easier Thanks for your input guys!

ive tried all sorts but the 14mm bolt & the washer bit on the other side just spin freely also these are very rusty

as above i'm wanting to know how i can remove my front wishbone bushes as i'm goin to buy some ''super pro'' bushes for the front wishbones ive removed the front wishbones from the car, but have no idea how to remove these ??? hopefully u guys can help me on this one too Thanks!

ive tried holding it with mole grips & undoing it with a 14mm spanner but the inner bit of the ring just spins freely ?? weird ?

Hello guys! I'm after some after market bushes (yellow ones or any good after market ones) I need these for the front antiroll bar & front lower arms bushes Anyone knw where i can get these from at a reasonable price ?? Thanks!

as above ive took my standard front antiroll bar off the car & wanting to remove he roll bar links.. i have tryed loosening the 14mm bolt on both the links on either side which seem to feel thre about to come off but just keep turning which is weird.. anyone know best ay to remove please ?