rmsnoel

Run the engine to heat the head up. Should come out.handy then

What about a longer bolt and a nut on the back of it?

Big respect for using the search function.

When I had a sticky cable I took it off, stuck one end in a coke bottle of light oil, taped it up and hung the bottle upside down to let the oil run down into the cable.

This can be bad cause oil holds dirt and scratches the plastic cable over the years BUT it passes mot.

I seen on a post of morgeys if the handbrake lever on top of the caliper sticking cause its dirty/rusty. Give that a good clean first and compare it to the other side.

Very few people have changed theres Id guess, in any car. Theres no need for an expensive option. Why do you ask though are you having problems or is your oil dirty. Mine is clean as a whistle since 1998

Thats a right bit of oil but still not an uncommon amount. If your timing belt is dry just keep an eye on it and your oil level. The 93_97 corolla haynes manual shows you how to change it. If you are getting a mechanic or someone to change it tell them not to use a gear puller on your bottom pulley because although it looks solid its actually rubber lined. You can see a ripped one in my build thread and replacements are getting harder to find

All in all I wouldnt worry too must about it

Tidy work man and sounds sweet. If u ever take them off again Id suggest grinding down that lip inside the runners to more of a knife edge so the air flows better and use some sealer on the manifolds and silicone jointers. Wheres your map sensor connected to if u dont mind me askin

I have the tube thing at the very top inside the car so it's as low as they go without removing the helper spring. Il see how they are after a week or so and get a few more pictures

Did u screw the spring all the way down and screw the bottom mount all the way in?

Lookin forward to the next stage, if u need a hand gimme a shout

@ Karl thanks for the photo lad

@Colin what is the tube for, is it to let the vw lads tighten up the top nut just?

@ Karl did u get sorted

Yes lad it will 100% work

If you buy a UK 4EFE engine and drop that in then yeah it will work fine, just use the manifolds etc from the JDM engine and bolt them to the UK engine.

No it wont work if your glanza s has coilpacks. Youll need a bugeye corolla 4efe that has coilpacks.

The reason is because the coilpack engines have a crank sensor in the oil pump housing. You could swap oil pumps or maybe even fit the cranksensor to the uk 4efe oilpump. Dont forget to use the glanza s bottom timing belt sprocket.

If your glanza s has a normal e38 dizzy then ignore everything Ive just said

Youve an air leak or your idle valve is broken

Hmm cheers thought that may be the case, I just knew of one kicking around. Will look for the 4 2 1 corrolla mani if I can find one...I'm fine with making bits of the exhaust system but not quite at manifold level yet! Shame the standard ones are so crap, used to get great results port matching on my old minis.

Theres loads of options such as re flanging a 4afe manifiold or any 4_1 off ebay

It would make it slower dude, the runners are much too short. You could buy manifolds from other toyotas, make your own or buy the obx manifold for a 5efe.

Do you trust the seller ok? He's offering me to pay by PayPal. 170 delivered I assume that's by a gift.

Never send money by gift, best to pay the few pounds more for peace of mind. Did it take long to get a reply from the seller

Can anyone reccomend a ebay supplier

Im just waiting on a reply from the ebay seller. Cant wait

Google it theres alot of stuff on this out there pluq morgey talked about this a while back. It would hardly matter on a turbo car though..

Any pictures of your ride height lad

Grand lad yours are TA technix for mk2 mk1 golfs

Colin can u post partnumbers for your coilovers. I know what u mean about the polo ones have the bottom mounts welded in place. If u ask a vw man theyll say oem a polo uses mk2golf fronts and mk1 golf rears but if we ordered a polo set it would be shit

Cheers Colin

Whats the wire you cut to do away with fuelcut, the yanks do it alot?

Get a wee oil change done before you start driving it fast and thatll keep her sweet.

Health to enjoy her man

Well lad is she any quickier with the manifild and exhaust