Ct9 mani to fit TD04 ?

[SpikeyJp_68]

Hi guys, just wondering if it would be possible to get a standard ct9 and modify it to accept a td04 ? Or is there any cheaper alternatives than wepr ect. ? Would love a wepr one as everyone says the best you can get just they're a pretty penny any help welcome

[adzy]

You can get a ct9 adapter kit, not sure who makes them new but have seen a few 2nd hand ones recently.

If your still using the standard mani I would just buy a td04 kit if that's what you want to run. The adapter kits are only worthwhile if you have a good aftermarket ct9 mani imo

[starletezy]

RW Developments makes ct9 to td04 adaptors mate it is the cheaper route yes

[SpikeyJp_68]

Cheers guys, I would be porting the ct9 mani also. I might wait a while and get a proper td04 mani as I'm in no rush. What's the going rate roughly for a 2nd hand mild steel td04 mani ?

[StuDoc 72]

Wouldnt waste your money if your planning on using the standard mani.

[starletezy]

I would get a better manifold mate the flow of the standard manifold is restrictive even with the ports cut out and polished

[SpikeyJp_68]

Aftermarket manifold it is was thinking ramshorn ?

[StuDoc 72]

Yes go with WEPR dont buy one off ebay you will regret it.

[Starlet__SR]

Do it right, do it once.

[SpikeyJp_68]

What's the going rate for a decent 2nd hand wepr mani ? They're very expensive new..

[starletezy]

Depends what WEPR manifold it is. Best thing to do is give Sacha at WEPR an message his very helpful might be able to get a deal on an complete kit or just manifold