turbominicooper Posted October 6, 2016 Share Posted October 6, 2016 trying to fit an apexi at2 unit to my ep82 (second hand unit). spliced the white/red wire from ignition to red on unit spliced the blue/red wire from the ignition to blue on unitspliced the black/white wire from the ignition to the green on unitspliced the yellow/blue from handbrake to the grey on unitearthed the black when i switch the ignition off the engine cuts out but the electronics stay on for the timed duration and then go off. pretty sure i got wires right as i cont-tested them before hooking up but havent managed to find an official Apexi AT2 wiring diagram. any ideas chaps or just faulty TT? cheers Quote Link to post Share on other sites
lukEp Posted October 6, 2016 Share Posted October 6, 2016 There are two ignition wires one being accessories and one being live even while cranking. It's the one while cranking you want not acc Quote Link to post Share on other sites
turbominicooper Posted October 7, 2016 Author Share Posted October 7, 2016 (edited) Ok cool I'll try and find that one. Any ideas on ep82 which one? Edited October 7, 2016 by turbominicooper Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.