00joeindastarb0 Posted October 12, 2016 Share Posted October 12, 2016 I would like to know if anyone has had issue when doing this, did it require wrapping the loom for added protection due to the proximity to the inlet.Thanks for your input Joe Quote Link to post Share on other sites
Dean_mc88 Posted October 13, 2016 Share Posted October 13, 2016 no issue when I done it on my gt and glanza using standard rail but my old style tuning developments rail wont let me do it. Quote Link to post Share on other sites
funny onion Posted October 13, 2016 Share Posted October 13, 2016 Just remove the plastic that the loom sits in, unplug the injectors and then feed the loom under the inlet and pull the plugs through the gap between runner 2 and 3. the only thing you might need to extend is the plug for the ICV. Turn the injectors gently without pulling them out so that the plugs face the inlet. I wrapped the loom in High temp waterproof PVC for a bit of protection but more to keep all the wires together and tidy. I also put a thin wrap of yellow pvc on the wires for injector 2 and 4 to differentiate them from 1 and 3. Quote Link to post Share on other sites
00joeindastarb0 Posted October 13, 2016 Author Share Posted October 13, 2016 Thanks for the replies Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.