patman Posted October 23, 2016 Share Posted October 23, 2016 (edited) Hello lads please could someone point me in the right direction here, I took my cluster out today, (was just checking the wires to the water temp gauge) as the needle has started bouncing about, anyway as I put the plugs at the back, back into the cluster, there was suddenly alittle bit of smoke, to cut the story short everything works on the cluster apart from the 3 main bulbs what light it up, I have checked fuses and the fuse for the cluster bulbs and everything seems fine, all headlight, tail light, brake lights etc are working ok, it's just the cluster 3 bulbs which is now confusing me, Is there something I missing here please? Or something I have not checked, I even swapped the fuse too just to see and still no dash lights Seems like with the little bit of smoke something has shortened, but there are no loose wires I can see behind the cluster, if anyone has any suggestions please let me know.Thanks pat Edited October 23, 2016 by patman Quote Link to post Share on other sites
maerijn Posted October 24, 2016 Share Posted October 24, 2016 Maybe the connectors shorted when putting them back in the cluster, have you tried replacing the bulbs and see if it works? Quote Link to post Share on other sites
patman Posted October 24, 2016 Author Share Posted October 24, 2016 Yes mate changed bulbs 👍🏻 Quote Link to post Share on other sites
patman Posted October 24, 2016 Author Share Posted October 24, 2016 Sorted 👍🏻 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.