SpikeyJp_68 Posted November 8, 2016 Share Posted November 8, 2016 Hi guys I'm looking to break my engine in with a tf035 on it but it won't have a map or fcd & rrfpr. Just a standard ecu and bigger injectors Can this be done without blowing it up if I get an adjustable actuator and run the lowest boost possible ? Taking it easy under 4000 rpm Lastly would this be a bad decision to break it in on low boost and then have it mapped at .8 or .9 bar ? Hope this makes semse and thanks in advance Quote Link to post Share on other sites
Ollieh17 Posted November 8, 2016 Share Posted November 8, 2016 Run a tf035 and a td04 at max boost before fuel cut on standard ecu with complete standard fuelling. No issues Quote Link to post Share on other sites
5e colin Posted November 8, 2016 Share Posted November 8, 2016 On my gtt no more then 7psi spikey Quote Link to post Share on other sites
SpikeyJp_68 Posted November 8, 2016 Author Share Posted November 8, 2016 That's spot on guys thanks very much. Forgot about fuel cut. So it won't make a difference if it's broke in on low-ish boost ? Quote Link to post Share on other sites
5e colin Posted November 8, 2016 Share Posted November 8, 2016 (edited) Nope won't do harm just keep eye on afr if you don't have get it before upping boost Edited November 8, 2016 by 5e colin Quote Link to post Share on other sites
Ollieh17 Posted November 8, 2016 Share Posted November 8, 2016 I ran my fresh built engine in with minimal boost and pretty gentle, just using revsLota of info on that on here, always differing opinions thoughIs it a fresh built standard engine new rings etc or forged build? Quote Link to post Share on other sites
SpikeyJp_68 Posted November 8, 2016 Author Share Posted November 8, 2016 Nope won't do harm just keep eye on afr if you don't have get it before upping boostA good wideband is on the to get list I ran my fresh built engine in with minimal boost and pretty gentle, just using revsLota of info on that on here, always differing opinions thoughIs it a fresh built standard engine new rings etc or forged build?Fresh build non-forged Quote Link to post Share on other sites
5e colin Posted November 8, 2016 Share Posted November 8, 2016 (edited) Go for the innovate mtxl as they link to other gauges so you can do the rpm vs boost vs afr vs egt like simple install on the laptop to do live record blasts Edited November 8, 2016 by 5e colin Quote Link to post Share on other sites
SpikeyJp_68 Posted November 9, 2016 Author Share Posted November 9, 2016 Go for the innovate mtxl as they link to other gauges so you can do the rpm vs boost vs afr vs egt like simple install on the laptop to do live record blastsWill look into it. Cheers Colin Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.