JBishop Posted January 12, 2018 Share Posted January 12, 2018 Forged pistons Performance valve springs 3e flywheel/ 5e clutch conversion so I can use 4efte clutch decent clutch! Link to post Share on other sites
Johnny Posted January 12, 2018 Share Posted January 12, 2018 I've got a set of Weisco 74.5 pistons and Scat Rods that I don't need now £450. Link to post Share on other sites
JBishop Posted January 12, 2018 Author Share Posted January 12, 2018 2 hours ago, Johnny said: I've got a set of Weisco 74.5 pistons and Scat Rods that I don't need now £450. Need 5e rods but how much for just pistons? Link to post Share on other sites
5e colin Posted January 12, 2018 Share Posted January 12, 2018 got 60£ aasco converted fly there to suit your needs worked perfect with my 6puc xtd Link to post Share on other sites
JBishop Posted January 12, 2018 Author Share Posted January 12, 2018 Been speaking to you mate not sure I want one that’s been modified but what power did your xtd 6puc girding stage 3 handle? And was it 212mm or 200mm? Link to post Share on other sites
5e colin Posted January 12, 2018 Share Posted January 12, 2018 212mm mate 1.1bar tdo4 it handled that clutch i dont have bhp as i self tune all the time to my boost and afr levels never go on rollers really Link to post Share on other sites
JBishop Posted January 12, 2018 Author Share Posted January 12, 2018 And did you use that flywheel pal? Just bought same xtd clutch but 200mm but wondering if it will hold now, what do you think? And do you know how much stock 5e can handle? Link to post Share on other sites
5e colin Posted January 12, 2018 Share Posted January 12, 2018 ofcourse i did oonly selling as i went back to oem fly for smoother driving getting sick of the modified parts thats all age thing Link to post Share on other sites
5e colin Posted January 12, 2018 Share Posted January 12, 2018 4 minutes ago, JBishop said: And did you use that flywheel pal? Just bought same xtd clutch but 200mm but wondering if it will hold now, what do you think? And do you know how much stock 5e can handle? 5efe 10 psi 5efhe 1.1bar thats pushing the pistons to max ringland failure follows soon rods upto 1.3/1.4bar Link to post Share on other sites
JBishop Posted January 12, 2018 Author Share Posted January 12, 2018 So it works fine and drives nice? What will the 5efe make on a td04 at 10psi that’s what I’m going to be putting it up to and will it be safe at that? Link to post Share on other sites
JBishop Posted January 12, 2018 Author Share Posted January 12, 2018 Wondering if this 200mm xtd clutch will hold at that power Link to post Share on other sites
danblp Posted January 12, 2018 Share Posted January 12, 2018 Could be intreated in rods if ya split Link to post Share on other sites
5e colin Posted January 12, 2018 Share Posted January 12, 2018 1 hour ago, JBishop said: Wondering if this 200mm xtd clutch will hold at that power 200mm no the torque will kill it 212mm yes tdo4 on 5e is like ct9 ish 4efte Link to post Share on other sites
Johnny Posted January 12, 2018 Share Posted January 12, 2018 6 hours ago, JBishop said: Need 5e rods but how much for just pistons? Pistons seperate £280 delivered. They will need new rings as they are used. rods £220 delivered. Link to post Share on other sites
JBishop Posted January 12, 2018 Author Share Posted January 12, 2018 2 hours ago, 5e colin said: 200mm no the torque will kill it 212mm yes tdo4 on 5e is like ct9 ish 4efte What power do you think td04 on stock 5e 10psi make do you think pal Link to post Share on other sites
5e colin Posted January 13, 2018 Share Posted January 13, 2018 Around 200 I think depends on health of engine to if I was you stop looking. At the bhp nrs and concentrate on your torque you gain lots of it try sourcing a acis manifold to make the tdo4 spool even faster by 300 to 500rpm Acis all the way to redline !!!!!! Link to post Share on other sites
JBishop Posted January 13, 2018 Author Share Posted January 13, 2018 It will spool faster by 300 to 500 rpm? Wow that’s impressive. I will have keep an eye for one Link to post Share on other sites
5e colin Posted January 14, 2018 Share Posted January 14, 2018 Welcome to acis world Link to post Share on other sites
Recommended Posts