mccartney11 Posted March 6, 2019 Posted March 6, 2019 Swapped out gearbox in my starlet and now engine is running lumpy / hunting on start up , as if it’s off a cylinder thought earth was issue ran clean earths to head and inlet and still the same, lambda cable was broken so soldered and heatshrinked it and issue still there? Anyone ever have this issue? Quote
akyakapotter Posted March 9, 2019 Posted March 9, 2019 Un pluged the lambda to see if it stops ? Quote
mccartney11 Posted March 9, 2019 Author Posted March 9, 2019 1 minute ago, akyakapotter said: Un pluged the lambda to see if it stops ? yeah tried it made no difference though Quote
mccartney11 Posted March 11, 2019 Author Posted March 11, 2019 Bump anyone any tips before I start pulling loom apart Quote
maerijn Posted March 12, 2019 Posted March 12, 2019 (edited) what about the earth on the gearbox? sounds like a vacuum leak Edited March 12, 2019 by maerijn Quote
mccartney11 Posted March 13, 2019 Author Posted March 13, 2019 9 hours ago, maerijn said: what about the earth on the gearbox? sounds like a vacuum leak Cleaned earth strap and mount , gonna check all lines and wiring the weekend, annoying when a simple gearbox change causes this hassle:( Quote
hopalong_neil Posted March 14, 2019 Posted March 14, 2019 Probably a dumb question but did you check all of the plug leads? When I refitted my gearbox I was leaning over on the engine to fit the selector cables and had dislodged a plug lead into the dizzy cap which wasn't overly apparent until I stated the car and had a similar running issue. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.