BurtEP82 Posted December 21, 2019 Share Posted December 21, 2019 So, engine is out for a standard rebuild/bay freshen up. I’m aware the the evap can be binned. Question for those that have been here, what else can be deleted to lessen the load on the appearance? I’m only going for speed vision ct9, wepr external gate. All inputs appreciated Thanks, Tom Quote Link to post Share on other sites
T-dog Posted December 21, 2019 Share Posted December 21, 2019 If you have removed the aircon , you can remove all of this stuff and just bung off the few pipes of the throttle body and then remove the charcoal canister and just vent the pipe to the floor . Toby 👍🏼 Quote Link to post Share on other sites
T-dog Posted December 21, 2019 Share Posted December 21, 2019 And also get a non aircon grommet for the firewall and remove the evaporator from inside the heater box Quote Link to post Share on other sites
BurtEP82 Posted December 21, 2019 Author Share Posted December 21, 2019 Top man, thanks Toby. I bought the car without air con so wasn’t aware those were associated. The evaporator was on the bin list 👍🏻 Quote Link to post Share on other sites
T-dog Posted December 21, 2019 Share Posted December 21, 2019 Yeah they help with the cars idle when the aircon is in use . No bother 👍🏼 Quote Link to post Share on other sites
BurtEP82 Posted January 24, 2020 Author Share Posted January 24, 2020 Slight follow up. Block is back from a rebuild but the liners are looking rusty and cruddy. Anyone got tips on how to clean this out? I’m going to try some citric acid, wishing I had a go combined with some sort of electrolysis before I had it built up. Any input appreciated Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.