Jump to content

Raising D2 Coilovers.


Recommended Posts

Can any tell me the proper way to raise the ride height of D2 Coilovers?

From the diagram below, which collors do I need to adjust? which don't effect messing up the spring's tension?

Or Does the coilover need to be fully disconected from bottom area where the Disc is mounted on?

DSC00770.jpg

Thanks Mart...

Link to post
Share on other sites

all you need to do is at the bottom of the spring there are two rings, wind the bottom one down first so that you are free to move the top ring, wind it up if you want to lower it and down if you want to raise it. Then wind the bottom ring up against the top ring to lock the whole thing off and jobs a good'n,

Link to post
Share on other sites

To be honest mate, thats the way I was going to raise it myself but I read thats the total wrong way to adjust them, as it compresses the springs tension. It even states this aswell in the D2 leaflet so Im clueless now... :p

Link to post
Share on other sites

Cheers for the help Rick, So I need to disconect the coilover from the hub first, then rotate it. Is it a hard job the disconnect from the hub or only a case of just unbolting the nuts holding it?

Thanks again for the help Rick. :p

Link to post
Share on other sites
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...