Jump to content

*** It begins - Main demo car parts being sold :-) - Please Read ***


Recommended Posts

Hi all,

Over the next few weeks we will be listing our main demo car parts in the s/hand section of the website:

http://www.toytuning.com/onlineshop/usedpartsbargains

Everything is on a first come first serve basis. A lot of very rare and bespoke parts so keep your eyes peeled for some bargains. We've already proved our abilities ten times over this year, with over 30 TT forged engines out there and with two of our other demo cars being featured in Japanese Performance come December and huge plans for the KP61 it will certainly be one to watch. While it won't be quite as competitive as a 500bhp/tonne 82 it certainly has more charm (and more fun if I'm honest!)

While I know some of you will be disappointed that we are not completing you must understand I will never become the Dori King unless we concentrate on the KP :haha:

If you want to ask any questions then do so here ;)

Thanks,

T

Link to post
Share on other sites

Sad to see it Tobs but like I said needs must ;)

But you will be back big style with the KP.

Please take my name off the Aasco as I have a new one ordered.

I replyed to your tt email man, hope you can get back to me.

Regards

Joz

Link to post
Share on other sites

Hey toby

I may be interested in sum parts (all to do with available funds) but for the life of me I can find your ep's spec list right now.

Would it be possible for you to post up here a quick list of stuff that you indeed to sell, no prices just an item list.

I think it would help if people knew what items were going on sale over the next while

Link to post
Share on other sites

Here we go mate, not everything is available as some has been taken already like the Fuel Cell and management but that gives the idea:

5E Bottom End w/ 4EFTE Head (1500cc)

Wiseco Low Comp Ceramic Coated Forged Pistons

Pauter Forged 5E Conrods With ARP Bolts

4AGE ARP Head Bolts

4AGE ARP Crank Bolts

Custom ACL Bearings

De-burred Block

Zep Racing Baffled Oil Sump

TRD 0.6mm Head Gasket (Due to Low Comp Pistons)

Cruise 256/256 Billet Cams

HRF Inner Shim Kit inc Springs, Retainers and Buckets

Ported/Polished/Gas Flowed Head

5 Angled Valves

4AGE Throttle Body

Custom Inlet Manifold

Light Weight Crank/Alternator/Waterpump/Power Steering Pulleys

HKS GT2835R Turbo

Custom Manifold

Sard Type CII 38MM External Wastegate

Custom downpipe

Side Exit Exhaust

Link Ignitor

Bosch Coil Packs

NKG (8) Plugs

HKS Twin Power Spark System

Greddy Type R High Boost BOV

Custom Oil Catch Can

Wizards of Nos Street Blaster 100i DP

Wizards of Nos Bottle Warmer

LINK LEM Full Standalone ECU with Launch Control

Link Boost Control

RC 700cc Injectors

Sard Fuel Pressure Regulator

ATL â??Dâ? Fuel Cell with Internal Collector and Triple Trap Door

2 x Bosch 200l/h External Pumps

Braided Fuel Lines

Toy Tuning Fuel Rail

98 Octane Fuel

Blitz LM Front Mounted Cooler

Zep Racing 3 Row Radiator

Sard Thermostat

Sard Rad Cap

Toy Tuning Rad Hoses

Sard Intercooler Sprayer

Sard Fan Controller

Raised Bonnet, Bonnet Lining Removed, Front Grille Removed

Intercooler Pipes Throttle Side Wrapped in Heat Reflective Material

Greddy Oil Cooler with Filter Relocation Kit

Greddy Short Filter

Sard Radiator Breather Tank

Toy Tuning Carbon Cooling Panel

Toy Tuning Billet Driveshafts and Hubs

ACT 6 Puck Clutch 5e

Aasco Lightweight Flywheel 5e

Quiafe ATB Differential

Rebuilt Gearbox

TRD Short Shifter

Zep Racing Braided Clutch Line

Tein Type Flex Coilovers w/ Pillowball Top Mounts,

Tein EDFC

Custom Weld in roll cage

Cusco Carbon Front Brace

Cusco Carbon Rear Brace

Zep C Pillar Bar

Ultra Racing Floor Bar

Ultra Racing Fender Bars

Ultra Racing Lower Arm Bar 4 Point

Ultra Racing Rear Lower Arm Bar

Whiteline 22mm Front ARB w/ Poly Links

Whiteline 20mm Rear ARB

Whiteline Antilift Kit

Whiteline Panhard Rod

Custom Weld in Roll Cage with front strut triangulation bars

Cusco Twist Beam Metal Bushes

Cusco Lower Arm Pillow Ball Bushes (Front and Rear)

Remaining Bushes Replaced

Toy Tuning Poly Engine Mounts

Zep Racing Engine Torque Damper

Uprated Custom Ball Joints and Track Rod Ends,

Fully Stripped (No Trim, A/C removed, No Dash)

Custom Racing Wheels 15 x 9Inch

225/45 888 All Round

Weld Racing Qtr Mile Wheels w/ Skinnies

Mickey T Full Drag Slicks (Junior)

Greddy Light weight exteneded wheel lugs

Toy Tuning 4 pot kit

Zep Racing Braided Lines All Round

Sard Type C Pads All Round

Cusco Brake Master Cylinder Stopper

Stock Rear Disks (To be replaced with Comp Brake 4pots Rear)

Bride Kevlar Bucket Seat,

Greddy/Trust Oil Pressure/Oil Temp/Water Temp/EGT/AFR/Fuel Pressure Gauges/Boost Gauges

Blitz Turbo Timer with Digital Boost Readings

Apexi 120mm Tacho with Shift Light

Tein Doll

Takata Harnesses

Toy Tuning Triple Pillar Pod

Cruise Pink Gear Knob

OEM Pedals

Bride Kevlar Mats

Toy Tuning Fibreglass Bonnet

Carbon Fibre Front Canards,

Carbon Fibre Rear Spoiler

Fibreglass Doors

Fibreglass Boot

Zep Racing Fibreglass 20mm Wider Fenders with Brake Ducts

Sard Aero Fins x 6

Flush Fit Bonnet Pins/Locks

Front Downforce Diffuser

Custom Rear Valance with Downforce slats

Toy Tuning Polycarbonate Light Weight Windows

T

Link to post
Share on other sites
Here we go mate,

Ultra Racing Floor Bar

Ultra Racing Fender Bars

Ultra Racing Rear Lower Arm Bar

Cusco Brake Master Cylinder Stopper

Toy Tuning Triple Pillar Pod

T

Ah thanx toby

the items ive left in your qoute above what kind of prices would you be willing to sell em for both singular and all together, I may be interested in some of them if the prices are good.

Also what colour is the triple A pillar pod because im only interested in that if it matches the UK spec light grey interior ?

Link to post
Share on other sites
errr no, it was never finished i believe...

There will be one soon though :)

Si, sent you 7 emails today, one with text and 6 with pictures. Tried sending one with all pictures but wouldn't send.

Can you confirm you received any? :)

As mentioned all parts will be added to the website so first come first serve.

Rick it wasn't completed, I would say 600bhp/tonne was realistic all we needed was 350hp and our turbo is the same one HRF got in excess of 400hp with. Weight would have been 600kg check out our carbon parts. heaviest item was the roll cage. We've just heard that a company would be interested in sponsoring which has put a real big spanner in the works.

Toby

Link to post
Share on other sites
Si, sent you 7 emails today, one with text and 6 with pictures. Tried sending one with all pictures but wouldn't send.

Can you confirm you received any? :)

As mentioned all parts will be added to the website so first come first serve.

Rick it wasn't completed, I would say 600bhp/tonne was realistic all we needed was 350hp and our turbo is the same one HRF got in excess of 400hp with. Weight would have been 600kg check out our carbon parts. heaviest item was the roll cage. We've just heard that a company would be interested in sponsoring which has put a real big spanner in the works.

Toby

Ops..yeah i did it from my work email so most probs do....

Ah about the sponsership...send em my way :)

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...