ady2k5 Posted February 9, 2009 Share Posted February 9, 2009 Hello allI've just noticed that the fog light which should be screwed to underneath the bumper on the Glanza V is dangling. I've tried to stick it back on with various types of sticky stuff including double sided tape and velcro temporarily but with no luck at all.It must've happened on this mornings commute to work. What can i do as i don't want to leave it dangling and i finish work at 5:00pm.Please reply asap.Many thanks Quote Link to post Share on other sites
scutch0 Posted February 9, 2009 Share Posted February 9, 2009 well you'll need it for mot, but alot of people remove them untill then, so you could just cut the wires to it and insulate them for now, and just remove it? Quote Link to post Share on other sites
ady2k5 Posted February 9, 2009 Author Share Posted February 9, 2009 well you'll need it for mot, but alot of people remove them untill then, so you could just cut the wires to it and insulate them for now, and just remove it?hi matewhat can i use to cut the wires as its seems fairly thick and strong, i only have scissors with me in the office lol. In terms of insulation what can i use?Also what about getting an electric as won't it need disconnecting from the mains?Thanks Quote Link to post Share on other sites
Dstillie Posted February 9, 2009 Share Posted February 9, 2009 mate use sum cable ties to tie it up out the way then wen mot day comes just get a new bracket n screw it on. Quote Link to post Share on other sites
ady2k5 Posted February 9, 2009 Author Share Posted February 9, 2009 mate use sum cable ties to tie it up out the way then wen mot day comes just get a new bracket n screw it on.hi matebut what do i tie it around, i can't find any hooks around near the back exhaust?thanks Quote Link to post Share on other sites
ady2k5 Posted February 9, 2009 Author Share Posted February 9, 2009 Hello allI know i mentioned this a bit earlier, but have a few queriesHow do i get to take the wire out, what will i need to remove to get to it and how easy it?What tools do i need?How much of a job is it? I don't want to end up going to a garage and getting charged £?? for it.Is there any chance of getting electricuted (health and safety matter)I've been told i can use cable ties, but what i can't find anything near the rear exhaust to tie it around?ThanksAdy Quote Link to post Share on other sites
Tintin_SR Posted February 9, 2009 Share Posted February 9, 2009 shooed be a towing eye up there, or the zost hanger etc Quote Link to post Share on other sites
ady2k5 Posted February 10, 2009 Author Share Posted February 10, 2009 Hello allSorry if its posted in the wrong section but i was unsure on what section it should go inAnyway where can i cable tie my dangling fog light (as mentioned before) it is just to the right hand side of the exhaust and was originally attached to underneath the rear bumper.I can't seem to find anything i can cable tie it to as i've had a look underneath.Information with any pics would be very much appreciated.Many thanks Quote Link to post Share on other sites
Jozinobi Posted February 10, 2009 Share Posted February 10, 2009 Hi adyPlease keep all queries related to your fog light problem in here.There is no need to start a separate thread.Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.