japcarmaniac Posted August 24, 2009 Share Posted August 24, 2009 http://cgi.ebay.co.uk/Toyota-Glanza-S-cam-...id=p3286.c0.m14do they have more lift than the standard ones? Quote Link to post Share on other sites
Guest Enzo Posted August 25, 2009 Share Posted August 25, 2009 Glanza S cams are the same as na 4efe's mate so no. Quote Link to post Share on other sites
nicwan8 Posted August 25, 2009 Share Posted August 25, 2009 Glanza S, Glanza V, 4efe, 5efe are all the same cams.4efte has 1mm extra lift but same duration. 5efhe off a SERA will be the best to go Quote Link to post Share on other sites
StarletRick Posted August 25, 2009 Share Posted August 25, 2009 4ewfte have higher lift? you got any proof of that? Quote Link to post Share on other sites
Steve GT Posted August 25, 2009 Share Posted August 25, 2009 was going to say i believe the turbo cams are slightly igher lifting than the n/a cams Quote Link to post Share on other sites
StarletRick Posted August 25, 2009 Share Posted August 25, 2009 id just like to see some proof of that. as ive never heard that before. was my understanding that they were all the same except for the fhe cams.only difference i knew about on the fte from the fe was the valve springs. Quote Link to post Share on other sites
RobSR Posted August 25, 2009 Share Posted August 25, 2009 I've heard there was a slight difference hence why some na owners fit a fte inlet cam..No idea if it would make a noticeable difference! Quote Link to post Share on other sites
nicwan8 Posted August 25, 2009 Share Posted August 25, 2009 4ewfte have higher lift? you got any proof of that?There have been many discussion on austarlet about this.http://www.austarletclub.com/forums/index....mp;hl=4efte+cam10sec_rx7 is no longer a member in austarlet but used to be a highly respected member, so we gave him benefit of the doubt Quote Link to post Share on other sites
StarletRick Posted August 25, 2009 Share Posted August 25, 2009 ah yeah, i know Dale. he does know his onions no doubt about that. that said, im pretty sure there isnt an apparent difference in the cams. if the figures are different, that would tent to suggest its a machining issue rather than a deliberate change.interesting discussion though. id quite like to have a look my self, i think i have some fe cams at home Quote Link to post Share on other sites
Steve GT Posted August 25, 2009 Share Posted August 25, 2009 yeh that would be good get the two together and physically look at any differences. might have a look on net now but doubt ask jeeves would know the answer lmaogot me interested now though so lemme know if you find out rick? Quote Link to post Share on other sites
StarletRick Posted August 25, 2009 Share Posted August 25, 2009 dont hold your breath, i wont look too hard into this. im done with tinkering with 4e's ^^ im just interested as i had always thought that they were the same (and still believe that to be honest). varying lifts on old used cams doenst really mean anything. could be wear and tear for all anyone knows. Quote Link to post Share on other sites
nicwan8 Posted August 26, 2009 Share Posted August 26, 2009 I totally agree with you StarletRick. There has been confusion between all of us in AustarletAll arguements coming from the top blokes;Jezza323 and co said it's the same cam10sec_rx7 and -Harry- saying it has extra 1mm lift. Quote Link to post Share on other sites
Guest Enzo Posted August 26, 2009 Share Posted August 26, 2009 i had the specs somewhere and they are the same.the fhe ones have the 1mm of extra lift,il need to hunt them out Quote Link to post Share on other sites
Glanza_cl Posted August 26, 2009 Share Posted August 26, 2009 either way 1mm... that's not going to make a large amount of difference anyway, wouldn't make any noticeable difference in real world driving i'm sure. Quote Link to post Share on other sites
StarletRick Posted August 26, 2009 Share Posted August 26, 2009 youd be surprised when you start revving the motor out.... it can make a decent difference. and thanks geo, i though they were the same! Quote Link to post Share on other sites
Steve GT Posted August 26, 2009 Share Posted August 26, 2009 well that settles it then there the same Quote Link to post Share on other sites
rmsnoel Posted November 11, 2009 Share Posted November 11, 2009 you4efe has its own inlet cam and shares exhaust cam with5efe. 5efe shares inlet cam with fte and something something. Yes they are all different people Ive checked. Please stop saying they are all the same. I have fte heads and cams on my 4efe and 5efe includin the stiffer vavle springs. They love revvin now Quote Link to post Share on other sites
chr15_7_t_ Posted November 12, 2009 Share Posted November 12, 2009 they will work though as ive had glanza s cams in my gt and they were that exact ones off ebay. car ran fine idled fine and still revs perfect. but then i upgraded to a 5efhe head Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.