Russleh Posted January 7, 2010 Share Posted January 7, 2010 anyone else run these lines. if so would it be possible to see a picture of the join between the brainded hose and the brake pipe where its secured with that c clip thing. doesnt fir through the hole and its different. i have the files on standby to make it fit but last resort Quote Link to post Share on other sites
Dan Evans Posted January 7, 2010 Share Posted January 7, 2010 you will have to file them away slightly bud, my DO-LUCK ones were the same bud. Quote Link to post Share on other sites
Russleh Posted January 7, 2010 Author Share Posted January 7, 2010 cool did u file the bit on the hole or the bracket on the car. cheers for the reply mate Quote Link to post Share on other sites
Dan Evans Posted January 7, 2010 Share Posted January 7, 2010 i filed the inside of the bracket on the car, but not too much just make sure its a tight fit lol Quote Link to post Share on other sites
minispark Posted March 14, 2010 Share Posted March 14, 2010 howdid you secure the fitting after you filed out the bracket could you describe as from what i can see even if you file the bracket its still not going to be totally secure??? Quote Link to post Share on other sites
Russleh Posted March 14, 2010 Author Share Posted March 14, 2010 finally got round to actually securing mine properly the other day. what i done was file the bracket on the car so its big enough for the end to go through and got myself 2 of the c clip things from toyota instead of the usual 1 and put 1 either side of the ride bit on the line. if you have the line you will know what i mean. hell of a tight fit but if ya flatten out the clips a bit as they come with a bend in them then ya can get 2 on. twice as secure as before Quote Link to post Share on other sites
minispark Posted March 14, 2010 Share Posted March 14, 2010 finally got round to actually securing mine properly the other day. what i done was file the bracket on the car so its big enough for the end to go through and got myself 2 of the c clip things from toyota instead of the usual 1 and put 1 either side of the ride bit on the line. if you have the line you will know what i mean. hell of a tight fit but if ya flatten out the clips a bit as they come with a bend in them then ya can get 2 on. twice as secure as before exactly what i was thinkin but justwanted to mke sure cheers bud! Quote Link to post Share on other sites
Amjad Posted March 14, 2010 Share Posted March 14, 2010 Russleh have you got a part number for the Toyota C-clips? I've been waiting to fit my Earl's lines for ages now lol..My kit didn't come with any C-clips so the Toyota ones are too thin, so I think the easiest thing would be to put two on each side? Quote Link to post Share on other sites
Dan Evans Posted March 14, 2010 Share Posted March 14, 2010 just go to a DIY shop and they will have them in there Quote Link to post Share on other sites
Amjad Posted March 14, 2010 Share Posted March 14, 2010 Cool thanks dude! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.