How do you fit a Blitz front mount intercooler to ep82?

[NightSpirit]

Ok it's driving me mad...anyone got a how to or pictures of theres being fitted so I can identify the pipework?

I've sussed that pipe 1 with arrow pointing from turbo goes to the skinny pipe 2, but pipe 2 is an awkward fit near the headlight and doesn't seem to allow any pipe to fit the core drivers side? The IC is fitted bang in the centre of the bumper bolted to 2 of the centre bar 10mm bolts (that's right I think)

The problem is that the bloody stickers for pipes 3-5 have vanished so I have no idea which way round the pipes go and no combination seems to work/fit.

Any help?? I'm doing the job (or trying to) now.

[NightSpirit]

You have got to be fucking joking me...lol using a copy of Hyper Rev and looking at the pics I've worked it out

So you have to cut through the underside of the arch area to feed the pipes through...nice.

Angle grinder to the ready ;)

[Glanza_Ragger]

i may be mistaken but you shouldnt have to go cutting through anything other than maybe the underneath of the front bumper to get the elbows to fit.

[lobotomy]

So you have to cut through the underside of the arch area to feed the pipes through...nice.

I had to cut through the plastic gaurds (the ones that go under the sump and attach to the bolt to the bumper) to get my Greddy FMIC to fit -- but that wasn't a hard job 30sec with a stanley knife.

[NightSpirit]

Well folks, it's on...and the bumper needed no modding, just the drivers side plastic arch needed cutting (and the engine bay)

The kit I got was EP82 only, not like the other kits I've had in (and sold...doh!)

You can see the pics of it here on the blog ;)