Sparky Posted January 20, 2011 Share Posted January 20, 2011 I NEED the loom, Just give me until next weekend, my dash will be out then.Anyways porting will aid spool up and mid and top range punch deffo worth doing if your going all out on 5e build ;) Quote Link to post Share on other sites
ryan lang Posted January 20, 2011 Share Posted January 20, 2011 okay dude no worries, got it waiting ;) Quote Link to post Share on other sites
yaristurbo Posted January 27, 2011 Author Share Posted January 27, 2011 wowowowowowowow 600 for head porting and polish with new seals, i think that expensive, has anyone else done this yet and how much was itoh yeh that wasnt including the devastating VAT Quote Link to post Share on other sites
whiteglanzav Posted January 27, 2011 Share Posted January 27, 2011 yer i paid around that much but it was an awesome job ! Quote Link to post Share on other sites
yaristurbo Posted January 27, 2011 Author Share Posted January 27, 2011 this was i bloke that did it in his shed lol Quote Link to post Share on other sites
yaristurbo Posted February 11, 2011 Author Share Posted February 11, 2011 right very small update the veedubs back on the road so the starbo has come off its in the garage and i managed to test fit the gt clocks and whip the bonnet off ready for dragging the old lump outplans are modifing the old strut brace from the yaris as it has the 3 bar map sensor and coil all ready nice mounted to it, and plus building up the 5e when it arrives from momentum motorsport, top set of lads and cheap for engine parts danny Quote Link to post Share on other sites
yaristurbo Posted February 14, 2011 Author Share Posted February 14, 2011 managed to drag the old lump out, drained the coolant it was nicely full of oil lol, good job i started the conversion now and not later, got a ported and polished head from another uksc member, put all my ally bits in a gunk bath ready for the rebuild. Quote Link to post Share on other sites
yaristurbo Posted February 14, 2011 Author Share Posted February 14, 2011 another item just turned up, a bargin Quote Link to post Share on other sites
mk1kurt Posted February 15, 2011 Share Posted February 15, 2011 my fucking sexy head on that..took hours to do but it will be worth it .. i didnt show you how mine revs with the same spec head goes clean off the rev guage on quater throttle and goes way above 7000 rpm god knows why...nice meeting you anyway mateykurt Quote Link to post Share on other sites
yaristurbo Posted February 15, 2011 Author Share Posted February 15, 2011 <br />my fucking sexy head on that..took hours to do but it will be worth it .. i didnt show you how mine revs with the same spec head goes clean off the rev guage on quater throttle and goes way above 7000 rpm god knows why...<br />nice meeting you anyway matey<br /><br />kurt<br /><br /><br /><br />U to mate Quote Link to post Share on other sites
EliteMilk Posted February 15, 2011 Share Posted February 15, 2011 nice man :]cant wait to see it done Quote Link to post Share on other sites
yaristurbo Posted February 15, 2011 Author Share Posted February 15, 2011 progess update made good progress today, got the walbro fitted, g/box out rear interior and started stripping the dash out ready for the motec wiring, will put a guide up for the walbro fitting if there isnt one.couple of pics Quote Link to post Share on other sites
yaristurbo Posted February 15, 2011 Author Share Posted February 15, 2011 any thoughts Quote Link to post Share on other sites
00joeindastarb0 Posted February 15, 2011 Share Posted February 15, 2011 Cool build should be nice and light starting with a uk spec Quote Link to post Share on other sites
yaristurbo Posted February 16, 2011 Author Share Posted February 16, 2011 hope so just got my head back from skimming got that to rebuild and wait for my block on a pallet to turn up Quote Link to post Share on other sites
LukeSR Posted February 16, 2011 Share Posted February 16, 2011 Awesome progress, didn't see this! Quote Link to post Share on other sites
yaristurbo Posted February 16, 2011 Author Share Posted February 16, 2011 ha ha luke hoping for a epic car, just loads of work going into it and a small fortunethinking about this colour, what is it???? Quote Link to post Share on other sites
GAZ@A&G_TUNING Posted February 16, 2011 Share Posted February 16, 2011 dont even think bout it chump!!!!!! Quote Link to post Share on other sites
yaristurbo Posted February 16, 2011 Author Share Posted February 16, 2011 please please its mint. ok il pick another lol Quote Link to post Share on other sites
yaristurbo Posted February 16, 2011 Author Share Posted February 16, 2011 its a anthena head gasket i will post up ratios as i cant remember, and a fte 4e head, thats right aint it???? putting doubts in my mind lol Quote Link to post Share on other sites
1987glanza Posted February 16, 2011 Share Posted February 16, 2011 great progress keep it up. Quote Link to post Share on other sites
yaristurbo Posted February 16, 2011 Author Share Posted February 16, 2011 TRYING MY BEST MATE LOL Quote Link to post Share on other sites
miib14 Posted February 21, 2011 Share Posted February 21, 2011 this is going to be nice... Quote Link to post Share on other sites
yaristurbo Posted February 22, 2011 Author Share Posted February 22, 2011 Right guys im steaming along with this one, ive managed to source a nice motec ecu, heads just about ready for building up all ported polished and skimmed. in the next few days the bottom end will arrive. both manis are ported, more polished than owt else.few pics oh yeah i fancied a gt boot lidsomething for the VTR'si think it will be ready for this seasons racing Quote Link to post Share on other sites
GAZ@A&G_TUNING Posted February 22, 2011 Share Posted February 22, 2011 Nice one dude, yeah this season should be def a step up from last, should be a few maki g some BIG BIG power 550+!!!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.