Amjad Posted February 11, 2011 Share Posted February 11, 2011 Hey GuysI'm about to start fitting my A'PEXi Turbo Timer, but just have a few questions. Here's the wiring diagrams I got with it;Just wanted to know, on the top right where it says, Red, Blue, Green wires, are they in the ignition harness around the steering wheel section? (Haven't taken it apart yet so I dunno where the harness is exactly. Are there Red, Blue, Green wires in the harness I can match the relay wires to?Also It shows O2 sensor/ground wiring going from the relay into the ECU. Here's the diagram of the wiring diagram for the EP82 ECU (was in the instructions, labelled T3-a)I have a Mine's ECU I'm about to fit, can I/should I connect the White (O2 sensor) and Black (Ground) into the ECU harness?Any help is much appreciated!Thanks!Amjad Quote Link to post Share on other sites
nazzurro19 Posted February 11, 2011 Share Posted February 11, 2011 dude bit early for this haha - sorry to go off topic but pm me later if ya go for a drive with the mines n tell me what happend Quote Link to post Share on other sites
DavidAshton Posted February 11, 2011 Share Posted February 11, 2011 Have you got an ignition harness for it, just a case of plugging it into that, one to the handbrake and an earth if need be?The fuck is the o2 sensor for on a turbo timer? Quote Link to post Share on other sites
Amjad Posted February 11, 2011 Author Share Posted February 11, 2011 dude bit early for this haha - sorry to go off topic but pm me later if ya go for a drive with the mines n tell me what happend ;)Will do when I get the chance Have you got an ignition harness for it, just a case of plugging it into that, one to the handbrake and an earth if need be?The fuck is the o2 sensor for on a turbo timer?No harness unfortunately, I just thought that's how the auto function would work? (Where it calculates the time to keep the engine running I mean) Or do you need something else for the auto function to work? Quote Link to post Share on other sites
Amjad Posted February 11, 2011 Author Share Posted February 11, 2011 ^ Quote Link to post Share on other sites
Amjad Posted February 11, 2011 Author Share Posted February 11, 2011 ^ Quote Link to post Share on other sites
bucketep91 Posted February 11, 2011 Share Posted February 11, 2011 u dont really need that function anyway mate, just leave it set around a minute or so Quote Link to post Share on other sites
DavidAshton Posted February 11, 2011 Share Posted February 11, 2011 Auto function works from car voltage, get a harness there like £10 off ebay, will save so much hassle. Quote Link to post Share on other sites
Amjad Posted February 11, 2011 Author Share Posted February 11, 2011 So if I hard wire it in as normal I can use Auto function yeah? Quote Link to post Share on other sites
Amjad Posted February 11, 2011 Author Share Posted February 11, 2011 Does anyone know where I should connect the Blue and Green wires to? Quote Link to post Share on other sites
Amjad Posted February 11, 2011 Author Share Posted February 11, 2011 Anybody? Quote Link to post Share on other sites
DavidAshton Posted February 11, 2011 Share Posted February 11, 2011 Ignition area is full of wires all over I wouldn't know where to begin, just use a harness because its cheap and simple and saves messing. Do it cheap do it twice also springs to mind.Harness........http://cgi.ebay.co.uk/HKS-TURBO-TIMER-HARN...=item4156b6c28b Quote Link to post Share on other sites
Amjad Posted February 11, 2011 Author Share Posted February 11, 2011 I didn't know that would fit an A'PEXi timer, would it? If so I may as well lolI'm stumped! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.