Stefan_s Posted March 7, 2012 Share Posted March 7, 2012 hi, i think there may be a problem with my clutch as sometimes when i put my clutch pedal right down the clutch isnt fully disengauged and is hard to take it out of gear, the car has a competition paddle clutch, any ideads what the problem could be?thanks Stefan Quote Link to post Share on other sites
adam starlet87 Posted March 7, 2012 Share Posted March 7, 2012 How old is the clutch? my TRD paddle clutch started to do this so i changed it for an exedy paddle and it was perfect after that. Quote Link to post Share on other sites
5T4R7ET N/A Posted March 7, 2012 Share Posted March 7, 2012 there is a thread on toyotagtturbo saying there is a slight problem with the pressure plate catching the bell housing.apparently it needs to be notched, dont know if that could be the problem. Quote Link to post Share on other sites
rinseep82 Posted March 7, 2012 Share Posted March 7, 2012 Before u do anything drastic mate I would change the fluid and bleed the system I kno it's only simple but could save u a fortune Quote Link to post Share on other sites
WallaceGlanza Posted March 7, 2012 Share Posted March 7, 2012 It may just be that the pedal itself needs adjusted, I had to do this when I fitted my Blitz clutch. It's just a simple case of adjusting at the pedal - one luck nut to undo then raise or lower the engage point by adjusting the threaded rod. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.